저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR2 5300 667MHz ECC Fully Buffered DIMM memory upgrade

SKU CH-HDWE-VPRKX

A 4 GB DDR2 kit with ECC fully buffered DIMMs for Apple Mac Pro 3.2 GHz Xeon systems

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • ECC protection prevents data corruption in critical workloads
  • Fully Buffered DIMM architecture supports high-capacity server configurations
  • 667 MHz DDR2 speed matches Mac Pro system requirements
  • 2 x 2 GB kit enables dual-channel installation
  • Compatible with Apple Mac Pro Xeon 2.8, 3.0, 3.2 GHz models

Kit for Apple Mac Pro Quad Core 3.2GHz

This 4GB kit contains two 2GB DDR2-667 fully buffered DIMMs built for the Apple Mac Pro Quad Core 3.2GHz. The modules use 240-pin DDR2 SDRAM with ECC and run at 1.8V. They are intended for server-grade memory slots in this specific workstation.

Fully buffered DDR2 ECC requirement

The Mac Pro Quad Core 3.2GHz requires fully buffered DDR2 ECC memory; standard unbuffered or non-ECC DDR2 will not function. These modules meet the CL5 5-5-5 timing and PC2-5300 specification demanded by the system's memory controller.

Capacity and headroom

Each of the two memory cards accepts four modules for a maximum of 16GB per card and 64GB total across eight slots. This 4GB kit occupies two slots; the remaining six slots allow further expansion up to the 64GB ceiling supported by third-party configurations.

주요 특징

  • ECC protection prevents data corruption in critical workloads
  • Fully Buffered DIMM architecture supports high-capacity server configurations
  • 667 MHz DDR2 speed matches Mac Pro system requirements
  • 2 x 2 GB kit enables dual-channel installation
  • Compatible with Apple Mac Pro Xeon 2.8, 3.0, 3.2 GHz models

사양

BrandComputer Memory Solutions
ModelCM256725300FBDIMM
Capacity4GB (2 x 2GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCYes
Buffered/RegisteredFully Buffered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemApple Mac Pro Quad Core 3.2Ghz
Package Content2 Memory RAM Sticks

이 상품에 대한 질문

How does the 667 MHz speed affect real-world performance in a Mac Pro?

The modules run at DDR2-667 (PC2-5300) with CL5 timing, matching the memory controller on the 2.8, 3.0 and 3.2 GHz Xeon models so the system operates at its rated bandwidth.

What does the fully buffered DIMM interface mean for compatibility and capacity?

Fully Buffered DIMM architecture is required by the Mac Pro memory cards; the kit installs in pairs across the eight slots, supporting up to 64 GB when all slots are populated with compatible modules.

What physical requirements must the Mac Pro meet to accept these 240-pin modules?

The Mac Pro uses 240-pin DDR2 FB-DIMM slots on dedicated memory cards; a special heat sink is required and modules must be installed in matched pairs per card.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.