Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR4 DIMM sticks, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM1024642400DIMM 32GB (4x8GB) DDR4 2400MHz CL17

SKU CH-N40S-CG7XQ

32GB kit of four 8GB DDR4 2400MHz CL17 unbuffered DIMMs validated for Supermicro X11SAE series motherboards

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 32 GB kit lets you fill all four slots for maximum capacity
  • DDR4 2400 MHz speed matches the motherboard’s rated frequency
  • CL17 timing delivers responsive latency for everyday workloads
  • 2 V operation keeps power draw low and thermals manageable
  • Validated for Supermicro X11SAE, X11SAE-F and X11SAE-M boards

32 GB DDR4 kit for Supermicro X11SAE boards

This 32 GB kit contains four 8 GB DDR4 2400 MHz modules built for Supermicro X11SAE, X11SAE-F and X11SAE-M motherboards. The DIMMs run at 1.2 V with CL17 17-17-17 timing and use unbuffered non-ECC 288-pin layout. They suit administrators upgrading compatible servers to the platform maximum of 64 GB.

Best for matched four-slot upgrades on listed boards

The kit targets users who need all four slots populated with identical modules to reach 64 GB total capacity on the supported Supermicro platforms. It is not for systems that require ECC or registered memory, nor for boards limited to two DIMM slots. Buyers needing higher frequencies or different densities should look at other specifications.

Straightforward DIMM installation

Install by seating each 288-pin module into the four DDR4 slots until the retention clips lock. The manufacturer recommends matched-pair placement for optimal performance and notes that mixing different modules will force all memory to run at the slowest installed speed. A 64-bit operating system is required to address more than 4 GB.

Kohokohdat

  • 32 GB kit lets you fill all four slots for maximum capacity
  • DDR4 2400 MHz speed matches the motherboard’s rated frequency
  • CL17 timing delivers responsive latency for everyday workloads
  • 2 V operation keeps power draw low and thermals manageable
  • Validated for Supermicro X11SAE, X11SAE-F and X11SAE-M boards

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM1024642400DIMM
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSupermicro X11SAE, X11SAE-F, X11SAE-M Motherboards
Package Content4 Memory RAM Sticks

Kysymyksiä tästä tuotteesta

My motherboard has four DIMM slots — will this 32 GB kit fill all four slots?

Yes, the kit contains four 8 GB sticks, so it occupies all four DIMM slots on the Supermicro X11SAE, X11SAE-F or X11SAE-M boards.

I already have DDR4 memory installed — will the new CL17 modules run at their rated 2400 MHz alongside the old sticks?

All memory in the system runs at the speed of the slowest installed modules or the CPU limit, so the kit will drop to match any slower DDR4 already present.

How can I confirm the kit is running at DDR4 2400 CL17 after installation?

Check the memory speed and timings in the BIOS or with a tool such as CPU-Z; they should show 2400 MHz and 17-17-17 when the system is using the full kit.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.