Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

Computer Memory Solutions

Computer Memory Solutions CM1024642400DIMM 32GB (4x8GB) DDR4 2400MHz CL17

SKU CH-N40S-CG7XQ

32GB kit of four 8GB DDR4 2400MHz CL17 unbuffered DIMMs validated for Supermicro X11SAE series motherboards

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 32 GB kit lets you fill all four slots for maximum capacity
  • DDR4 2400 MHz speed matches the motherboard’s rated frequency
  • CL17 timing delivers responsive latency for everyday workloads
  • 2 V operation keeps power draw low and thermals manageable
  • Validated for Supermicro X11SAE, X11SAE-F and X11SAE-M boards

32 GB DDR4 kit for Supermicro X11SAE boards

This 32 GB kit contains four 8 GB DDR4 2400 MHz modules built for Supermicro X11SAE, X11SAE-F and X11SAE-M motherboards. The DIMMs run at 1.2 V with CL17 17-17-17 timing and use unbuffered non-ECC 288-pin layout. They suit administrators upgrading compatible servers to the platform maximum of 64 GB.

Best for matched four-slot upgrades on listed boards

The kit targets users who need all four slots populated with identical modules to reach 64 GB total capacity on the supported Supermicro platforms. It is not for systems that require ECC or registered memory, nor for boards limited to two DIMM slots. Buyers needing higher frequencies or different densities should look at other specifications.

Straightforward DIMM installation

Install by seating each 288-pin module into the four DDR4 slots until the retention clips lock. The manufacturer recommends matched-pair placement for optimal performance and notes that mixing different modules will force all memory to run at the slowest installed speed. A 64-bit operating system is required to address more than 4 GB.

Puncte forte

  • 32 GB kit lets you fill all four slots for maximum capacity
  • DDR4 2400 MHz speed matches the motherboard’s rated frequency
  • CL17 timing delivers responsive latency for everyday workloads
  • 2 V operation keeps power draw low and thermals manageable
  • Validated for Supermicro X11SAE, X11SAE-F and X11SAE-M boards

Specificații

BrandComputer Memory Solutions
ModelCM1024642400DIMM
Capacity32GB (4 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSupermicro X11SAE, X11SAE-F, X11SAE-M Motherboards
Package Content4 Memory RAM Sticks

Întrebări despre acest articol

My motherboard has four DIMM slots — will this 32 GB kit fill all four slots?

Yes, the kit contains four 8 GB sticks, so it occupies all four DIMM slots on the Supermicro X11SAE, X11SAE-F or X11SAE-M boards.

I already have DDR4 memory installed — will the new CL17 modules run at their rated 2400 MHz alongside the old sticks?

All memory in the system runs at the speed of the slowest installed modules or the CPU limit, so the kit will drop to match any slower DDR4 already present.

How can I confirm the kit is running at DDR4 2400 CL17 after installation?

Check the memory speed and timings in the BIOS or with a tool such as CPU-Z; they should show 2400 MHz and 17-17-17 when the system is using the full kit.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.