Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Computer Memory Solutions

Computer Memory Solutions CM5126412800DIMM 4GB DDR3 1600MHz CL11 1.5V DIMM memory upgrade

SKU CH-466F-0S549

4 GB DDR3 1600 MHz CL11 DIMM module validated for ASRock H61 Pro, H61 Pro BTC, H61DEL and H61M motherboards

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 4GB capacity expands system memory for smoother multitasking
  • DDR3 1600MHz speed delivers responsive desktop performance
  • CL11 latency provides efficient data access timing
  • 5V operation matches standard DDR3 voltage requirements
  • Guaranteed compatibility with ASRock H61 series motherboards

Targeted DDR3 Upgrade

This 4GB DDR3 DIMM is built for owners of ASRock H61 Pro, H61 Pro BTC, H61DEL and H61M motherboards who need a straightforward memory increase. It installs in a single 240-pin slot and runs at 1600MHz with CL11 timing at the standard 1.5V voltage.

Capacity and Headroom

The module provides 4GB in a 1Rx8 unbuffered configuration, using one of the board's two available DIMM sockets. The platform supports a maximum of 16GB, so this stick leaves room for a second module to reach the ceiling or can serve as a direct replacement for a smaller original stick.

Thermals and Power

Without a heat spreader, the module relies on case airflow and draws power at the standard DDR3 1.5V level. As an unbuffered non-ECC stick it presents minimal electrical load, so normal system cooling is sufficient and acoustic impact is negligible during typical workloads.

Kohokohdat

  • 4GB capacity expands system memory for smoother multitasking
  • DDR3 1600MHz speed delivers responsive desktop performance
  • CL11 latency provides efficient data access timing
  • 5V operation matches standard DDR3 voltage requirements
  • Guaranteed compatibility with ASRock H61 series motherboards

Tekniset tiedot

BrandComputer Memory Solutions
ModelCM5126412800DIMM
Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemASRock H61 Pro, H61 Pro BTC, H61DEL, H61M Motherboard
Package Content1Memory Ram Stick

Kysymyksiä tästä tuotteesta

Will this 240-pin DDR3 1600 MHz module run alongside the DDR3 memory already in my H61 Pro board?

The module uses standard DDR3 1600 (PC3 12800) timing and 1.5 V, so it will operate with existing DDR3 DIMMs; the system will run all modules at the slowest common speed.

How can I verify the CL11 1600 MHz stick is running at its rated speed after installation?

Open the BIOS or a tool such as CPU-Z and confirm the memory frequency shows 800 MHz (DDR3 1600) with 11-11-11 timings at 1.5 V.

What comes in the box and do I need anything else for my ASRock H61 Pro?

The package contains one 4 GB 240-pin DDR3 DIMM; the board has two slots and supports up to 16 GB, so no extra parts are required unless you want a second module.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.