Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

Computer Memory Solutions

Computer Memory Solutions CM5126412800DIMM 4GB DDR3 1600MHz CL11 1.5V DIMM memory upgrade

SKU CH-466F-0S549

4 GB DDR3 1600 MHz CL11 DIMM module validated for ASRock H61 Pro, H61 Pro BTC, H61DEL and H61M motherboards

  • Capacity4GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.5V
  • 4GB capacity expands system memory for smoother multitasking
  • DDR3 1600MHz speed delivers responsive desktop performance
  • CL11 latency provides efficient data access timing
  • 5V operation matches standard DDR3 voltage requirements
  • Guaranteed compatibility with ASRock H61 series motherboards

Targeted DDR3 Upgrade

This 4GB DDR3 DIMM is built for owners of ASRock H61 Pro, H61 Pro BTC, H61DEL and H61M motherboards who need a straightforward memory increase. It installs in a single 240-pin slot and runs at 1600MHz with CL11 timing at the standard 1.5V voltage.

Capacity and Headroom

The module provides 4GB in a 1Rx8 unbuffered configuration, using one of the board's two available DIMM sockets. The platform supports a maximum of 16GB, so this stick leaves room for a second module to reach the ceiling or can serve as a direct replacement for a smaller original stick.

Thermals and Power

Without a heat spreader, the module relies on case airflow and draws power at the standard DDR3 1.5V level. As an unbuffered non-ECC stick it presents minimal electrical load, so normal system cooling is sufficient and acoustic impact is negligible during typical workloads.

Pluspunten

  • 4GB capacity expands system memory for smoother multitasking
  • DDR3 1600MHz speed delivers responsive desktop performance
  • CL11 latency provides efficient data access timing
  • 5V operation matches standard DDR3 voltage requirements
  • Guaranteed compatibility with ASRock H61 series motherboards

Specificaties

BrandComputer Memory Solutions
ModelCM5126412800DIMM
Capacity4GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemASRock H61 Pro, H61 Pro BTC, H61DEL, H61M Motherboard
Package Content1Memory Ram Stick

Vragen over dit artikel

Will this 240-pin DDR3 1600 MHz module run alongside the DDR3 memory already in my H61 Pro board?

The module uses standard DDR3 1600 (PC3 12800) timing and 1.5 V, so it will operate with existing DDR3 DIMMs; the system will run all modules at the slowest common speed.

How can I verify the CL11 1600 MHz stick is running at its rated speed after installation?

Open the BIOS or a tool such as CPU-Z and confirm the memory frequency shows 800 MHz (DDR3 1600) with 11-11-11 timings at 1.5 V.

What comes in the box and do I need anything else for my ASRock H61 Pro?

The package contains one 4 GB 240-pin DDR3 DIMM; the board has two slots and supports up to 16 GB, so no extra parts are required unless you want a second module.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.