COOLMOON 120mm 3-Pack Case Fan Red 1300RPM 38.5CFM 25dBA Hydro Bearing 4-Pin ARGB Remote
- 3 Fans
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
COOLMOON
Six 120 mm hydro-bearing fans deliver 38.5 CFM at up to 1300 RPM while running at 25 dBA, with 380 addressable RGB modes controllable by remote or 5 V motherboard sync
Option 6 Packs
This pack contains six 120 mm case fans that spin from zero to 1300 RPM and move 38.5 CFM of air at 25 dBA. Hydro bearings and eight silicone damping pads keep vibration low. Each unit draws 4.2 W at 12 V through a 4-pin power connector and includes a 48 cm cable. The controller box links all fans to a single DC supply and adds a 5 V 3-pin sync cable for motherboard addressable RGB control.
The RF remote offers 380 preset modes and music-rhythm sync for instant colour changes. Addressable RGB requires a motherboard with a 5 V 3-pin header; 12 V 4-pin RGB headers are not supported. Buyers who need PWM speed curves, higher static pressure for radiators, or a single high-RPM fan should look at other models.
Standard 120 mm screw holes accept the included fasteners. One controller powers all six fans from a single 4-pin DC connector, freeing motherboard fan headers for other components. The 5 V 3-pin sync cable connects to a compatible motherboard header so lighting can be managed in BIOS or vendor software. Rated life is 25000 hours.
| Brand | COOLMOON |
|---|---|
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | Hydro Bearing |
| RPM | 0 - 1300 RPM+/-10% |
| Air Flow | 38.5 CFM |
| Noise Level | 25 dBA +/- 10% |
| Power Connector | 4 Pin |
| LED | RGB |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
A 5V 3-pin addressable RGB header is required; the 4-pin 12V RGB header is not supported.
No, the fans connect to the included controller box which is powered by a D-type 4-pin connector from the power supply.
Use BIOS or monitoring software to confirm the RPM reads near 1300 RPM ±10% and noise stays around 25 dBA ±10%.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?