Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Six square 120mm case fans with translucent blades and black frames, shown together with a small controller box and a handheld remote

COOLMOON

COOLMOON 120mm RGB Case Fan 6 Pack 1300 RPM 38.5 CFM 25 dBA Hydro Bearing 5V ARGB Remote Control

SKU CH-PWYH-45AKG

Six 120 mm hydro-bearing fans deliver 38.5 CFM at up to 1300 RPM while running at 25 dBA, with 380 addressable RGB modes controllable by remote or 5 V motherboard sync

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeHydro Bearing
  • RPM0 - 1300 RPM+/-10%
  • Air Flow38.5 CFM
  • Noise Level25 dBA +/- 10%

Option 6 Packs

  • 380 lighting modes via wireless remote
  • 6 mmH₂O static pressure for dense radiators
  • Hydro bearing rated 25,000 hours life
  • 25 dBA at 1,300 RPM for quiet cooling
  • 5 V 3-pin ARGB sync with major motherboards

Six-Fan Kit with Remote and Motherboard Sync

This pack contains six 120 mm case fans that spin from zero to 1300 RPM and move 38.5 CFM of air at 25 dBA. Hydro bearings and eight silicone damping pads keep vibration low. Each unit draws 4.2 W at 12 V through a 4-pin power connector and includes a 48 cm cable. The controller box links all fans to a single DC supply and adds a 5 V 3-pin sync cable for motherboard addressable RGB control.

Builders Who Want Unified Lighting Without Extra

The RF remote offers 380 preset modes and music-rhythm sync for instant colour changes. Addressable RGB requires a motherboard with a 5 V 3-pin header; 12 V 4-pin RGB headers are not supported. Buyers who need PWM speed curves, higher static pressure for radiators, or a single high-RPM fan should look at other models.

Drops Into Any 120 mm Mount With One Power Lead

Standard 120 mm screw holes accept the included fasteners. One controller powers all six fans from a single 4-pin DC connector, freeing motherboard fan headers for other components. The 5 V 3-pin sync cable connects to a compatible motherboard header so lighting can be managed in BIOS or vendor software. Rated life is 25000 hours.

Pontos fortes

  • 380 lighting modes via wireless remote
  • 6 mmH₂O static pressure for dense radiators
  • Hydro bearing rated 25,000 hours life
  • 25 dBA at 1,300 RPM for quiet cooling
  • 5 V 3-pin ARGB sync with major motherboards

Especificações

BrandCOOLMOON
TypeCase Fan
CompatibilityCase
Bearing TypeHydro Bearing
RPM0 - 1300 RPM+/-10%
Air Flow38.5 CFM
Noise Level25 dBA +/- 10%
Power Connector4 Pin
LEDRGB

Outras versões deste modelo

Mais 1 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

What type of motherboard header is required for the 5V ARGB sync cable?

A 5V 3-pin addressable RGB header is required; the 4-pin 12V RGB header is not supported.

Can the fans be powered directly from the motherboard fan headers?

No, the fans connect to the included controller box which is powered by a D-type 4-pin connector from the power supply.

How do I verify the fans are spinning at the rated speed after installation?

Use BIOS or monitoring software to confirm the RPM reads near 1300 RPM ±10% and noise stays around 25 dBA ±10%.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.