BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Corsair
16GB quad-channel DDR3L kit at 1600MHz with CL9 timing and 1.35V low voltage
This Corsair Vengeance kit provides 16GB of DDR3L memory across four 4GB modules. It runs at 1600MHz with CL9 9-9-9-24 timings and a low 1.35V voltage. The green heat spreaders aid thermal management and suit Intel quad-channel desktop platforms.
The quad-channel kit installs like standard DIMMs; align the notch and press until the latches click. Most issues arise when mixing this set with existing sticks or when the motherboard defaults to 1.5V instead of the rated 1.35V. Enable the XMP 1.3 profile in BIOS to lock in the correct speed, voltage and timings.
Under continuous workloads the low-voltage DDR3L modules draw less power and generate less heat than standard 1.5V DDR3. The Vengeance heat spreaders dissipate that heat steadily, keeping timings stable at 1600MHz. The kit is also validated for Intel and AMD dual-channel DDR3 platforms if quad-channel slots are unavailable.
| Brand | CORSAIR |
|---|---|
| Series | Vengeance |
| Model | CMZ16GX3M4X1600C9G |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL9 |
| Timing | 9-9-9-24 |
| Voltage | 1.35V |
| Multi-channel Kit | Quad Channel Kit |
| Color | Green |
| Heat Spreader | Yes |
| Features | 16GB (4x4GB) DDR3 for Intel quad channel platforms. 1600MHz with headroom to allow overclocking 1.35V Low Voltage 9-9-9-24 latency Vengeance Green heat spreader for styling and performance Intel XMP 1.3 (Extreme Memory Profile) Support Also compatible with Intel and AMD dual channel DDR3 Platforms |
| Lähetyspaino | 0.25 kg |
| Pakkauksen mitat | 152 × 124 × 20 mm |
Enter the system BIOS or UEFI and open the memory information screen. It should show 1600MHz speed and timings of 9-9-9-24. If the board supports Intel XMP 1.3, enable the profile to apply the rated settings automatically.
The package contains four 4GB DDR3L DIMMs with green Vengeance heat spreaders, totalling 16GB. No extra cables, brackets or software are required; the modules slot directly into compatible desktop memory sockets.
This kit provides four matched 4GB modules tested together for quad-channel operation on supported Intel platforms. The 1.35V DDR3L voltage and XMP 1.3 profile give rated 1600MHz performance across all four slots, which a dual-channel kit cannot guarantee when populated to four modules.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?