BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Corsair
16GB quad-channel DDR3L kit at 1600MHz with CL9 timing and 1.35V low voltage
This Corsair Vengeance kit provides 16GB of DDR3L memory across four 4GB modules. It runs at 1600MHz with CL9 9-9-9-24 timings and a low 1.35V voltage. The green heat spreaders aid thermal management and suit Intel quad-channel desktop platforms.
The quad-channel kit installs like standard DIMMs; align the notch and press until the latches click. Most issues arise when mixing this set with existing sticks or when the motherboard defaults to 1.5V instead of the rated 1.35V. Enable the XMP 1.3 profile in BIOS to lock in the correct speed, voltage and timings.
Under continuous workloads the low-voltage DDR3L modules draw less power and generate less heat than standard 1.5V DDR3. The Vengeance heat spreaders dissipate that heat steadily, keeping timings stable at 1600MHz. The kit is also validated for Intel and AMD dual-channel DDR3 platforms if quad-channel slots are unavailable.
| Brand | CORSAIR |
|---|---|
| Series | Vengeance |
| Model | CMZ16GX3M4X1600C9G |
| Capacity | 16GB (4 x 4GB) |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL9 |
| Timing | 9-9-9-24 |
| Voltage | 1.35V |
| Multi-channel Kit | Quad Channel Kit |
| Color | Green |
| Heat Spreader | Yes |
| Features | 16GB (4x4GB) DDR3 for Intel quad channel platforms. 1600MHz with headroom to allow overclocking 1.35V Low Voltage 9-9-9-24 latency Vengeance Green heat spreader for styling and performance Intel XMP 1.3 (Extreme Memory Profile) Support Also compatible with Intel and AMD dual channel DDR3 Platforms |
| Prepravná hmotnosť | 0.25 kg |
| Rozmery balenia | 152 × 124 × 20 mm |
Enter the system BIOS or UEFI and open the memory information screen. It should show 1600MHz speed and timings of 9-9-9-24. If the board supports Intel XMP 1.3, enable the profile to apply the rated settings automatically.
The package contains four 4GB DDR3L DIMMs with green Vengeance heat spreaders, totalling 16GB. No extra cables, brackets or software are required; the modules slot directly into compatible desktop memory sockets.
This kit provides four matched 4GB modules tested together for quad-channel operation on supported Intel platforms. The 1.35V DDR3L voltage and XMP 1.3 profile give rated 1600MHz performance across all four slots, which a dual-channel kit cannot guarantee when populated to four modules.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?