Corsair RS120 PWM 120mm case fan CO-9050188-WW 25mm Magnetic Dome bearing
- 1 Fan
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Corsair
A 120 mm ARGB case fan with magnetic dome bearing, daisy-chain PWM and 5 V ARGB connectors, 420–2100 RPM, 13.3–72.8 CFM airflow and 10–36 dBA noise
Fan Size 120mm
Model RS120 ARGB Single Pack
The Corsair RS120 ARGB PWM 120mm fan simplifies cable management by letting you daisy-chain multiple units through a single 4-pin PWM connector and one +5V ARGB header. AirGuide anti-vortex vanes concentrate airflow toward hot components, while the Magnetic Dome bearing reduces friction for quieter operation and longer life. It spins from 420 to 2100 RPM, delivering 13.3 to 72.8 CFM with a noise range of 10 to 36 dBA.
This fan suits builders who want addressable RGB lighting controlled through their motherboard software without a separate controller hub. The zero RPM mode stops the fan completely at low loads for silent running. Buyers who need white or coloured frames, or who prefer hydraulic or rifle bearings, should look at other models.
Verify your motherboard has a spare 4-pin PWM header and a +5V ARGB header to drive the fan and lighting. Ensure your case or radiator accepts standard 120mm x 25mm mounting points. The package includes one fan and four mounting screws.
| Brand | Corsair |
|---|---|
| Model | CO-9050180-WW |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Magnetic Dome |
| RPM | 0, 420 - 2100 RPM +/- 10% |
| Air Flow | 13.3 - 72.8 CFM |
| Air Pressure | 0.2 - 4.15 mm-H2O |
| Noise Level | 10 - 36 dBA |
| Color | Black |
| LED | ARGB |
| Dimensions | 120mm x 120mm x 25mm |
| Package Contents | 1x RS120 ARGB Fan 4x Mounting Screws |
| Lähetyspaino | 0.23 kg |
| Pakkauksen mitat | 150 × 127 × 48 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, the box contains four mounting screws sized for the 120 mm frame so you can secure it straight away.
The fan uses a standard 4-pin PWM connector and supports zero-RPM mode, so it will run from any 4-pin header while letting the board stop it completely at low load.
Set a solid colour in the board's ARGB utility; all eight LEDs on the fan should change instantly and stay in sync with the rest of your daisy-chained devices.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?