Corsair RS120 PWM 120mm case fan CO-9050188-WW 25mm Magnetic Dome bearing
- 1 Fan
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Corsair
Three 120 mm fans with ARGB lighting, magnetic dome bearings and daisy-chain PWM control deliver up to 72.8 CFM airflow and 2.8 mm-H2O static pressure at a maximum 36 dBA
Fan Size 120mm
Model RS120 ARGB Triple Pack
This Corsair RS120 triple pack provides three 120mm case fans with addressable RGB lighting and PWM speed control. Each fan uses a magnetic dome bearing and runs from 420 to 2100 RPM with a zero-RPM mode for silent idle. The pack suits builders who want coordinated airflow and lighting across multiple mount points in a standard ATX or mid-tower chassis.
Instead of occupying three separate fan and ARGB headers, the fans connect in series through one 4-pin PWM connector and one +5V ARGB connector. This simplifies cable routing and frees motherboard headers for other devices. The jump is worthwhile when your board has limited headers or when you prefer a single control curve for all three fans rather than managing them independently.
Your motherboard must supply a standard +5V ARGB header to drive the lighting; a 12V RGB header will not work. Verify that your case or radiator has 120mm mounting holes with 25mm depth clearance for each fan. The package includes 12 mounting screws, so no additional hardware is required if the mounting pattern matches.
| Brand | Corsair |
|---|---|
| Model | CO-9050181-WW |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Magnetic Dome |
| RPM | 0, 420 - 2100 RPM +/- 10% |
| Air Flow | 13.3 - 72.8 CFM |
| Air Pressure | 0.2 - 4.15 mm-H2O |
| Noise Level | 10 - 36 dBA |
| Color | Black |
| LED | ARGB |
| Dimensions | 120mm x 120mm x 25mm |
| Package Contents | 3x RS120 ARGB Fans 12x Mounting Screws |
| Lähetyspaino | 0.64 kg |
| Pakkauksen mitat | 152 × 131 × 84 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Each fan measures 120mm square and 25mm thick, so the case or radiator must provide at least 25mm depth per fan plus room for the daisy-chain cables.
Link the 4-pin PWM and +5V ARGB leads from fan to fan, then plug the first fan into a single motherboard PWM header and a single 5V ARGB header; do not mix 12V RGB headers.
The Magnetic Dome bearing is designed for low friction and long life; no routine lubrication is required, and the fan supports Zero RPM mode to reduce wear at idle.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?