Corsair RS120 PWM 120mm case fan CO-9050188-WW 25mm Magnetic Dome bearing
- 1 Fan
- Case Fan
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
Corsair
Three 120 mm fans with ARGB lighting, magnetic dome bearings and daisy-chain PWM control deliver up to 72.8 CFM airflow and 2.8 mm-H2O static pressure at a maximum 36 dBA
Fan Size 120mm
Model RS120 ARGB Triple Pack
This Corsair RS120 triple pack provides three 120mm case fans with addressable RGB lighting and PWM speed control. Each fan uses a magnetic dome bearing and runs from 420 to 2100 RPM with a zero-RPM mode for silent idle. The pack suits builders who want coordinated airflow and lighting across multiple mount points in a standard ATX or mid-tower chassis.
Instead of occupying three separate fan and ARGB headers, the fans connect in series through one 4-pin PWM connector and one +5V ARGB connector. This simplifies cable routing and frees motherboard headers for other devices. The jump is worthwhile when your board has limited headers or when you prefer a single control curve for all three fans rather than managing them independently.
Your motherboard must supply a standard +5V ARGB header to drive the lighting; a 12V RGB header will not work. Verify that your case or radiator has 120mm mounting holes with 25mm depth clearance for each fan. The package includes 12 mounting screws, so no additional hardware is required if the mounting pattern matches.
| Brand | Corsair |
|---|---|
| Model | CO-9050181-WW |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Magnetic Dome |
| RPM | 0, 420 - 2100 RPM +/- 10% |
| Air Flow | 13.3 - 72.8 CFM |
| Air Pressure | 0.2 - 4.15 mm-H2O |
| Noise Level | 10 - 36 dBA |
| Color | Black |
| LED | ARGB |
| Dimensions | 120mm x 120mm x 25mm |
| Package Contents | 3x RS120 ARGB Fans 12x Mounting Screws |
| Prepravná hmotnosť | 0.64 kg |
| Rozmery balenia | 152 × 131 × 84 mm |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
Each fan measures 120mm square and 25mm thick, so the case or radiator must provide at least 25mm depth per fan plus room for the daisy-chain cables.
Link the 4-pin PWM and +5V ARGB leads from fan to fan, then plug the first fan into a single motherboard PWM header and a single 5V ARGB header; do not mix 12V RGB headers.
The Magnetic Dome bearing is designed for low friction and long life; no routine lubrication is required, and the fan supports Zero RPM mode to reduce wear at idle.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?