Corsair RS120 PWM 120mm case fan CO-9050188-WW 25mm Magnetic Dome bearing
- 1 Fan
- Case Fan
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Corsair
Three 120 mm fans with ARGB lighting, magnetic dome bearings and daisy-chain PWM control deliver up to 72.8 CFM airflow and 2.8 mm-H2O static pressure at a maximum 36 dBA
Fan Size 120mm
Model RS120 ARGB Triple Pack
This Corsair RS120 triple pack provides three 120mm case fans with addressable RGB lighting and PWM speed control. Each fan uses a magnetic dome bearing and runs from 420 to 2100 RPM with a zero-RPM mode for silent idle. The pack suits builders who want coordinated airflow and lighting across multiple mount points in a standard ATX or mid-tower chassis.
Instead of occupying three separate fan and ARGB headers, the fans connect in series through one 4-pin PWM connector and one +5V ARGB connector. This simplifies cable routing and frees motherboard headers for other devices. The jump is worthwhile when your board has limited headers or when you prefer a single control curve for all three fans rather than managing them independently.
Your motherboard must supply a standard +5V ARGB header to drive the lighting; a 12V RGB header will not work. Verify that your case or radiator has 120mm mounting holes with 25mm depth clearance for each fan. The package includes 12 mounting screws, so no additional hardware is required if the mounting pattern matches.
| Brand | Corsair |
|---|---|
| Model | CO-9050181-WW |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Magnetic Dome |
| RPM | 0, 420 - 2100 RPM +/- 10% |
| Air Flow | 13.3 - 72.8 CFM |
| Air Pressure | 0.2 - 4.15 mm-H2O |
| Noise Level | 10 - 36 dBA |
| Color | Black |
| LED | ARGB |
| Dimensions | 120mm x 120mm x 25mm |
| Package Contents | 3x RS120 ARGB Fans 12x Mounting Screws |
| Szállítási súly | 0.64 kg |
| Csomagméret | 152 × 131 × 84 mm |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Each fan measures 120mm square and 25mm thick, so the case or radiator must provide at least 25mm depth per fan plus room for the daisy-chain cables.
Link the 4-pin PWM and +5V ARGB leads from fan to fan, then plug the first fan into a single motherboard PWM header and a single 5V ARGB header; do not mix 12V RGB headers.
The Magnetic Dome bearing is designed for low friction and long life; no routine lubrication is required, and the fan supports Zero RPM mode to reduce wear at idle.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?