Corsair RS120 PWM 120mm case fan CO-9050188-WW 25mm Magnetic Dome bearing
- 1 Fan
- Case Fan
Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.
Corsair
Three 120 mm fans with ARGB lighting, magnetic dome bearings and daisy-chain PWM control deliver up to 72.8 CFM airflow and 2.8 mm-H2O static pressure at a maximum 36 dBA
Fan Size 120mm
Model RS120 ARGB Triple Pack
This Corsair RS120 triple pack provides three 120mm case fans with addressable RGB lighting and PWM speed control. Each fan uses a magnetic dome bearing and runs from 420 to 2100 RPM with a zero-RPM mode for silent idle. The pack suits builders who want coordinated airflow and lighting across multiple mount points in a standard ATX or mid-tower chassis.
Instead of occupying three separate fan and ARGB headers, the fans connect in series through one 4-pin PWM connector and one +5V ARGB connector. This simplifies cable routing and frees motherboard headers for other devices. The jump is worthwhile when your board has limited headers or when you prefer a single control curve for all three fans rather than managing them independently.
Your motherboard must supply a standard +5V ARGB header to drive the lighting; a 12V RGB header will not work. Verify that your case or radiator has 120mm mounting holes with 25mm depth clearance for each fan. The package includes 12 mounting screws, so no additional hardware is required if the mounting pattern matches.
| Brand | Corsair |
|---|---|
| Model | CO-9050181-WW |
| Fan Counts | 3 Fans |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120mm |
| Fan Thickness | 25mm |
| Bearing Type | Magnetic Dome |
| RPM | 0, 420 - 2100 RPM +/- 10% |
| Air Flow | 13.3 - 72.8 CFM |
| Air Pressure | 0.2 - 4.15 mm-H2O |
| Noise Level | 10 - 36 dBA |
| Color | Black |
| LED | ARGB |
| Dimensions | 120mm x 120mm x 25mm |
| Package Contents | 3x RS120 ARGB Fans 12x Mounting Screws |
| Peso de envio | 0.64 kg |
| Dimensões da embalagem | 152 × 131 × 84 mm |
Outras versões deste modelo
Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.
Each fan measures 120mm square and 25mm thick, so the case or radiator must provide at least 25mm depth per fan plus room for the daisy-chain cables.
Link the 4-pin PWM and +5V ARGB leads from fan to fan, then plug the first fan into a single motherboard PWM header and a single 5V ARGB header; do not mix 12V RGB headers.
The Magnetic Dome bearing is designed for low friction and long life; no routine lubrication is required, and the fan supports Zero RPM mode to reduce wear at idle.
Também nesta secção
Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.
O que paga, e a moeda em que vê os preços.
Enviado da sua carteira ao finalizar a compra
Apenas informativo — o catálogo está em dólares
Nenhuma moeda corresponde.
Escolha o idioma em que o site lhe fala.
Nenhum idioma corresponde.
Ainda não tem conta?
Já tem conta?
Não existe reposição automática: esta loja não envia qualquer e-mail, pelo que não há nenhum link de utilização única para pedir. Deixe o endereço na conta e ele será tratado manualmente.
Pedido registado
Não vai chegar nada à sua caixa de entrada — esta loja não envia qualquer e-mail. Alguém trata disto manualmente.
Recordou-se dela?