We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Corsair

Corsair CO-9050181-WW RS120 ARGB PWM 120mm case fan triple pack

SKU CH-MZ36-BVFMB MPN CO-9050181-WW

Three 120 mm fans with ARGB lighting, magnetic dome bearings and daisy-chain PWM control deliver up to 72.8 CFM airflow and 2.8 mm-H2O static pressure at a maximum 36 dBA

  • Fan Counts3 Fans
  • TypeCase Fan
  • CompatibilityCase
  • Fan Size120mm
  • Fan Thickness25mm
  • Bearing TypeMagnetic Dome

Fan Size 120mm

  • Daisy-chain three fans with one PWM and one ARGB cable
  • AirGuide anti-vortex vanes focus airflow on hot components
  • Magnetic Dome bearing runs at 10 dBA minimum for quiet operation
  • Zero RPM mode stops fans completely at low loads
  • 8 mm-H2O static pressure pushes air through radiator fins

Triple-pack ARGB PWM fans for case cooling

This Corsair RS120 triple pack provides three 120mm case fans with addressable RGB lighting and PWM speed control. Each fan uses a magnetic dome bearing and runs from 420 to 2100 RPM with a zero-RPM mode for silent idle. The pack suits builders who want coordinated airflow and lighting across multiple mount points in a standard ATX or mid-tower chassis.

Daisy-chain wiring replaces individual headers

Instead of occupying three separate fan and ARGB headers, the fans connect in series through one 4-pin PWM connector and one +5V ARGB connector. This simplifies cable routing and frees motherboard headers for other devices. The jump is worthwhile when your board has limited headers or when you prefer a single control curve for all three fans rather than managing them independently.

Check for +5V ARGB header and mounting clearance

Your motherboard must supply a standard +5V ARGB header to drive the lighting; a 12V RGB header will not work. Verify that your case or radiator has 120mm mounting holes with 25mm depth clearance for each fan. The package includes 12 mounting screws, so no additional hardware is required if the mounting pattern matches.

Highlights

  • Daisy-chain three fans with one PWM and one ARGB cable
  • AirGuide anti-vortex vanes focus airflow on hot components
  • Magnetic Dome bearing runs at 10 dBA minimum for quiet operation
  • Zero RPM mode stops fans completely at low loads
  • 8 mm-H2O static pressure pushes air through radiator fins

Specifications

BrandCorsair
ModelCO-9050181-WW
Fan Counts3 Fans
TypeCase Fan
CompatibilityCase
Fan Size120mm
Fan Thickness25mm
Bearing TypeMagnetic Dome
RPM0, 420 - 2100 RPM +/- 10%
Air Flow13.3 - 72.8 CFM
Air Pressure0.2 - 4.15 mm-H2O
Noise Level10 - 36 dBA
ColorBlack
LEDARGB
Dimensions120mm x 120mm x 25mm
Package Contents3x RS120 ARGB Fans
12x Mounting Screws
Shipping weight0.64 kg
Package size152 × 131 × 84 mm

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What clearance does the 120mm by 25mm frame need in my case?

Each fan measures 120mm square and 25mm thick, so the case or radiator must provide at least 25mm depth per fan plus room for the daisy-chain cables.

How do I connect the three fans using the daisy-chain PWM and 5V ARGB headers?

Link the 4-pin PWM and +5V ARGB leads from fan to fan, then plug the first fan into a single motherboard PWM header and a single 5V ARGB header; do not mix 12V RGB headers.

When should I expect the Magnetic Dome bearing to need attention?

The Magnetic Dome bearing is designed for low friction and long life; no routine lubrication is required, and the fan supports Zero RPM mode to reduce wear at idle.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.