NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Crucial
8GB DDR4 2666 desktop memory module with CL19 latency and 1.20V operation
This Crucial CT8G4DFS8266 module provides 8GB of DDR4 memory rated at 2666 MT/s with a CAS latency of 19. It operates at the standard 1.20V and uses an unbuffered, non-ECC design. The DIMM is built for desktop systems that support DDR4 technology.
The stick fits standard consumer motherboards that accept unbuffered DDR4 DIMMs. It will not work in servers or workstations that require registered or ECC memory. Builders needing capacities beyond 8GB per slot or speeds higher than 2666 MT/s should consider other modules.
The 2666 MT/s data rate sets the peak bandwidth this module can deliver. Systems limited to lower DDR4 speeds will run the memory at the slower rate, while platforms that support 2666 MT/s gain the full throughput advantage over DDR3.
| Brand | Crucial |
|---|---|
| Model | CT8G4DFS8266 |
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Speeds start at 2133 MT/s and faster data rates are expected to be available as DDR4 technology matures Increase bandwidth by up to 32% Reduce power consumption by up to 40% Faster burst access speeds for improved sequential data throughput Optimized for next generation processors and platforms Available in four channel kits up to 64GB |
The module operates at 1.20V, reducing power consumption by up to 40% versus DDR3, so it generates less heat during continuous use.
It needs a DDR4 DIMM slot and a memory controller that supports DDR4 2666 (PC4 21300) unbuffered non-ECC memory.
No, DDR4 and DDR3 use different physical slots and voltages, so they cannot be mixed in the same system.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?