NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.
Crucial
8GB DDR4 2666 desktop memory module with CL19 latency and 1.20V operation
This Crucial CT8G4DFS8266 module provides 8GB of DDR4 memory rated at 2666 MT/s with a CAS latency of 19. It operates at the standard 1.20V and uses an unbuffered, non-ECC design. The DIMM is built for desktop systems that support DDR4 technology.
The stick fits standard consumer motherboards that accept unbuffered DDR4 DIMMs. It will not work in servers or workstations that require registered or ECC memory. Builders needing capacities beyond 8GB per slot or speeds higher than 2666 MT/s should consider other modules.
The 2666 MT/s data rate sets the peak bandwidth this module can deliver. Systems limited to lower DDR4 speeds will run the memory at the slower rate, while platforms that support 2666 MT/s gain the full throughput advantage over DDR3.
| Brand | Crucial |
|---|---|
| Model | CT8G4DFS8266 |
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Speeds start at 2133 MT/s and faster data rates are expected to be available as DDR4 technology matures Increase bandwidth by up to 32% Reduce power consumption by up to 40% Faster burst access speeds for improved sequential data throughput Optimized for next generation processors and platforms Available in four channel kits up to 64GB |
The module operates at 1.20V, reducing power consumption by up to 40% versus DDR3, so it generates less heat during continuous use.
It needs a DDR4 DIMM slot and a memory controller that supports DDR4 2666 (PC4 21300) unbuffered non-ECC memory.
No, DDR4 and DDR3 use different physical slots and voltages, so they cannot be mixed in the same system.
Anche in questo reparto
Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.
Cosa invia per pagare, e in quale valuta legge i prezzi.
Inviato dal Suo portafoglio alla cassa
Solo a titolo indicativo — il catalogo è espresso in dollari
Nessuna valuta corrisponde.
Scelga la lingua in cui il sito Le parla.
Prima visita?
Ne ha già uno?
Non esiste un ripristino automatico: questo negozio non invia e-mail, quindi non esiste alcun link monouso da richiedere. Lasci l’indirizzo sull’account: verrà gestito manualmente.
Richiesta registrata
Non arriverà nulla nella Sua casella di posta — questo negozio non invia e-mail. Qualcuno se ne occupa manualmente.
L’ha ritrovata?