Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
2.5 inch SAS hard drive in Dell caddy

DELL

DELL 1.8TB 10K RPM SAS 12GB/s 2.5" Internal Hard Drive

SKU CH-JFXW-BEY80

High-capacity 1.8 TB SAS hard drive spins at 10 K RPM with a 12 Gb/s interface in a 2.5-inch form factor for enterprise workloads

  • 8 TB capacity stores large datasets
  • 10K RPM spindle delivers fast data access
  • SAS 12 GB/s interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • 24/7 duty cycle supports continuous operation

Dell Compatible 1.8TB SAS Drive

This Dell-compatible internal hard drive delivers 1.8TB of storage on a 2.5-inch form factor. It spins at 10K RPM and uses a SAS 12GB/s interface for enterprise workloads. The drive is built for 24/7 duty cycles in server environments. New units ship in genuine Dell caddies from WD, Seagate or Hitachi mechanisms.

Suited For SAS Storage Arrays

This drive suits administrators expanding Dell PowerEdge or PowerVault arrays that require 12GB/s SAS connectivity. It fits 2.5-inch hot-swap bays and meets enterprise 24/7 duty-cycle demands. Buyers needing a different interface or a 3.5-inch form factor cannot use this unit. Capacity requirements above 1.8TB also rule out this model.

Interface Speed Decides Fit

The single specification that determines compatibility is the 12GB/s SAS interface. Your controller or backplane must support this exact speed and protocol for the drive to function. A 6GB/s SAS or 10K RPM requirement alone is not sufficient. Verify the 12GB/s SAS capability before purchase.

Kohokohdat

  • 8 TB capacity stores large datasets
  • 10K RPM spindle delivers fast data access
  • SAS 12 GB/s interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • 24/7 duty cycle supports continuous operation

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What is the expected lifespan of the SAS interface under continuous 24/7 operation?

The drive is rated for 24/7 cycle duty and enterprise-grade workloads, with the supplier reporting an RMA rate below 5 percent across more than 10000 units sold.

Which limit appears first during sustained writes — the 12 GB/s SAS link or the 10K RPM mechanical speed?

The 10K RPM rotational speed is the primary bottleneck for sustained sequential throughput; the 12 GB/s SAS interface provides headroom well above what the platters can deliver.

How much heat and noise does the 2.5 inch 10K RPM drive produce when running all day in a server chassis?

Enterprise 2.5 inch 10K RPM drives generate noticeable heat and audible seek noise under constant load; plan for active airflow across the caddy and expect typical enterprise acoustic levels.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.