暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL 1.8TB 10K RPM SAS 12GB/s 2.5" Internal Hard Drive

SKU CH-JFXW-BEY80

High-capacity 1.8 TB SAS hard drive spins at 10 K RPM with a 12 Gb/s interface in a 2.5-inch form factor for enterprise workloads

  • 8 TB capacity stores large datasets
  • 10K RPM spindle delivers fast data access
  • SAS 12 GB/s interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • 24/7 duty cycle supports continuous operation

Dell Compatible 1.8TB SAS Drive

This Dell-compatible internal hard drive delivers 1.8TB of storage on a 2.5-inch form factor. It spins at 10K RPM and uses a SAS 12GB/s interface for enterprise workloads. The drive is built for 24/7 duty cycles in server environments. New units ship in genuine Dell caddies from WD, Seagate or Hitachi mechanisms.

Suited For SAS Storage Arrays

This drive suits administrators expanding Dell PowerEdge or PowerVault arrays that require 12GB/s SAS connectivity. It fits 2.5-inch hot-swap bays and meets enterprise 24/7 duty-cycle demands. Buyers needing a different interface or a 3.5-inch form factor cannot use this unit. Capacity requirements above 1.8TB also rule out this model.

Interface Speed Decides Fit

The single specification that determines compatibility is the 12GB/s SAS interface. Your controller or backplane must support this exact speed and protocol for the drive to function. A 6GB/s SAS or 10K RPM requirement alone is not sufficient. Verify the 12GB/s SAS capability before purchase.

特長

  • 8 TB capacity stores large datasets
  • 10K RPM spindle delivers fast data access
  • SAS 12 GB/s interface enables high-throughput transfers
  • 5 inch form factor fits dense server bays
  • 24/7 duty cycle supports continuous operation

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

What is the expected lifespan of the SAS interface under continuous 24/7 operation?

The drive is rated for 24/7 cycle duty and enterprise-grade workloads, with the supplier reporting an RMA rate below 5 percent across more than 10000 units sold.

Which limit appears first during sustained writes — the 12 GB/s SAS link or the 10K RPM mechanical speed?

The 10K RPM rotational speed is the primary bottleneck for sustained sequential throughput; the 12 GB/s SAS interface provides headroom well above what the platters can deliver.

How much heat and noise does the 2.5 inch 10K RPM drive produce when running all day in a server chassis?

Enterprise 2.5 inch 10K RPM drives generate noticeable heat and audible seek noise under constant load; plan for active airflow across the caddy and expect typical enterprise acoustic levels.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。