Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Bare 3.5 inch SAS hard drive with tray

DELL

DELL 400-AFZQ 4TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-ATYE-C2FKD

A 4 TB 3.5" SAS 12 Gb/s 7200 RPM internal hard drive for nearline storage

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity4TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • Form Factor3.5"
  • 4 TB capacity stores large datasets
  • 7,200 RPM spindle delivers quick data access
  • SAS 12 Gb/s interface enables fast transfers
  • 5-inch form factor fits standard drive bays
  • New condition provides full manufacturer reliability

Dell 400-AFZQ 4TB SAS drive

The Dell 400-AFZQ is a 4TB 3.5-inch internal hard drive built for Dell PowerEdge servers. It spins at 7200 RPM and connects through a SAS 12Gb/s interface. The unit ships as a bare drive with a tray for direct installation in compatible bays. Condition is new.

Suited for nearline storage arrays

This drive suits administrators expanding nearline storage in Dell PowerEdge systems that accept 3.5-inch SAS drives. Buyers who need solid-state latency, a different interface, or a 2.5-inch form factor should look elsewhere. It is not intended for external enclosures or desktop PCs lacking SAS controllers.

SAS 12Gb/s interface

The single specification that decides fit is the SAS 12Gb/s interface. Your server backplane and controller must support this exact connection to recognise and use the drive. Verify the part number 400-AFZQ against your system service manual before purchase.

Kohokohdat

  • 4 TB capacity stores large datasets
  • 7,200 RPM spindle delivers quick data access
  • SAS 12 Gb/s interface enables fast transfers
  • 5-inch form factor fits standard drive bays
  • New condition provides full manufacturer reliability

Tekniset tiedot

BrandDell
Model400-AFZQ
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity4TB
RPM7200 RPM
Average Latency12Gb/s
Form Factor3.5"

Kysymyksiä tästä tuotteesta

Will my SAS controller or backplane accept the 12 Gb/s interface of this 400-AFZQ drive?

The drive uses a 12 Gb/s SAS interface and will negotiate down to the speed your controller or backplane supports, so it works with 6 Gb/s or 3 Gb/s hosts without changes.

Can I keep using my existing 6 Gb/s SAS cables and backplane with this 400-AFZQ drive?

Yes, standard SAS cables and 6 Gb/s backplanes are fully compatible; the drive simply operates at the lower link speed while retaining its 4 TB capacity and 7200 RPM performance.

How can I verify the 400-AFZQ is running at 7200 RPM and the expected 12 Gb/s link after installation?

Check the negotiated link speed and rotational speed in your RAID controller BIOS, SAS topology utility, or OS tools such as smartctl; they will report 7200 RPM and the active SAS rate.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.