Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-AHFG 1.2TB 2.5" SAS 12Gb/s 10000 RPM internal hard drive

SKU CH-SXR8-DTTHW

A 1.2TB 2.5-inch SAS drive spinning at 10000 RPM with a 12Gb/s interface for hot-swap server bays

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • High-speed data access with 10000 RPM spindle
  • 2TB capacity stores large enterprise datasets
  • 12Gb/s SAS interface delivers rapid transfer rates
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive replacement without downtime

Dell 400-AHFG 1.2TB SAS Drive

This Dell 400-AHFG is a 1.2TB 2.5-inch internal hard drive with a SAS 12Gb/s interface and a 10000 RPM spindle. It is built for servers and storage arrays that need hot-swap capability and nearline performance. The bare-drive packaging suits system integrators and IT departments replacing or expanding drive bays. Dell original part number 400-AHFG ensures compatibility with qualified Dell platforms.

Suits hot-swap bays; not for fixed trays

Administrators running Dell PowerEdge or compatible enclosures with hot-swap backplanes will find this drive a direct fit. It is not suitable for systems that only accept fixed-mount 2.5-inch drives or that lack a SAS 12Gb/s controller. Laptop users and desktop builders without a SAS host adapter should look elsewhere. Workloads demanding higher capacity per spindle or solid-state latency will need a different class of drive.

SAS 12Gb/s interface decides fit

The single specification that determines whether this part works in your environment is the SAS 12Gb/s interface. Your backplane, RAID controller or HBA must support 12Gb/s SAS signalling for the drive to operate at its rated transfer rate. Without a compatible SAS connection the drive will not function, regardless of capacity or spindle speed.

Kohokohdat

  • High-speed data access with 10000 RPM spindle
  • 2TB capacity stores large enterprise datasets
  • 12Gb/s SAS interface delivers rapid transfer rates
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive replacement without downtime

Tekniset tiedot

BrandDell
Model400-AHFG
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.2TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Kysymyksiä tästä tuotteesta

Should I choose the 1.2TB 10000 RPM SAS drive or a lower-capacity alternative?

The 1.2TB capacity combined with 10000 RPM provides higher throughput and lower latency than smaller nearline SAS drives, making it better suited for transactional workloads that need both space and speed.

What does the 12Gb/s transfer rate mean once the drive is installed in a server?

The 12Gb/s SAS interface allows the drive to sustain sequential reads and writes near the interface limit, so large backup jobs and database scans complete faster than on 6Gb/s SAS drives.

Does the SAS 12Gb/s interface cap performance in a typical RAID controller?

A SAS 12Gb/s controller matches the drive's native speed, so the 10000 RPM spindle becomes the limiting factor rather than the interface, delivering full nearline SAS performance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.