Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL 400-AIER 1.8TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-PMH7-AKXAJ

A 1.8 TB SAS hard drive with a 2.5 inch form factor spinning at 10000 RPM for 12 Gb/s transfer rates

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • High-capacity 1.8TB storage for demanding workloads
  • Fast 10000 RPM spindle speeds data access
  • Reliable SAS 12Gb/s interface ensures throughput
  • Compact 2.5-inch form factor fits dense bays
  • Hot-swap tray simplifies drive replacement

Dell 400-AIER 1.8TB SAS 10K drive

This Dell 400-AIER is a 1.8TB 2.5-inch internal hard drive with a SAS 12Gb/s interface spinning at 10000 RPM. It is supplied as a bare drive with a hot-swap tray for direct installation into compatible bays. The unit is new and carries the original Dell part number 400-AIER.

Suited to SAS arrays needing 10K speed

This drive fits servers and storage arrays that accept 2.5-inch SAS drives and require 10000 RPM performance with a 12Gb/s link. Systems limited to slower interfaces or lacking a SAS backplane will not be able to use this drive. Buyers needing a different capacity or form factor should consider other models.

SAS 12Gb/s interface determines compatibility

The single specification that decides fit is the SAS 12Gb/s interface. The drive must connect to a controller or backplane that supports this exact protocol and speed. Without a matching SAS connection the drive cannot operate.

Kohokohdat

  • High-capacity 1.8TB storage for demanding workloads
  • Fast 10000 RPM spindle speeds data access
  • Reliable SAS 12Gb/s interface ensures throughput
  • Compact 2.5-inch form factor fits dense bays
  • Hot-swap tray simplifies drive replacement

Tekniset tiedot

BrandDell
Model400-AIER
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Kysymyksiä tästä tuotteesta

What server or controller must I already have to install this 2.5" SAS 12Gb/s drive?

You need a system with a 2.5-inch hot-swap bay and a SAS controller or backplane that supports 12Gb/s SAS signalling.

Will this 10K RPM SAS drive work in the same hot-swap tray as my older 10K SAS drives?

Yes, the 2.5-inch form factor and SAS interface match standard hot-swap trays used for 10K SAS drives, so it fits the same carrier.

How can I verify the drive is running at 12Gb/s after installation?

Check the controller BIOS or management utility; it should report the link speed as 12Gb/s and show the 1.8TB capacity with 10000 RPM.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.