We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DELL

DELL 400-AIER 1.8TB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-PMH7-AKXAJ

A 1.8 TB SAS hard drive with a 2.5 inch form factor spinning at 10000 RPM for 12 Gb/s transfer rates

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • High-capacity 1.8TB storage for demanding workloads
  • Fast 10000 RPM spindle speeds data access
  • Reliable SAS 12Gb/s interface ensures throughput
  • Compact 2.5-inch form factor fits dense bays
  • Hot-swap tray simplifies drive replacement

Dell 400-AIER 1.8TB SAS 10K drive

This Dell 400-AIER is a 1.8TB 2.5-inch internal hard drive with a SAS 12Gb/s interface spinning at 10000 RPM. It is supplied as a bare drive with a hot-swap tray for direct installation into compatible bays. The unit is new and carries the original Dell part number 400-AIER.

Suited to SAS arrays needing 10K speed

This drive fits servers and storage arrays that accept 2.5-inch SAS drives and require 10000 RPM performance with a 12Gb/s link. Systems limited to slower interfaces or lacking a SAS backplane will not be able to use this drive. Buyers needing a different capacity or form factor should consider other models.

SAS 12Gb/s interface determines compatibility

The single specification that decides fit is the SAS 12Gb/s interface. The drive must connect to a controller or backplane that supports this exact protocol and speed. Without a matching SAS connection the drive cannot operate.

Highlights

  • High-capacity 1.8TB storage for demanding workloads
  • Fast 10000 RPM spindle speeds data access
  • Reliable SAS 12Gb/s interface ensures throughput
  • Compact 2.5-inch form factor fits dense bays
  • Hot-swap tray simplifies drive replacement

Specifications

BrandDell
Model400-AIER
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Questions about this item

What server or controller must I already have to install this 2.5" SAS 12Gb/s drive?

You need a system with a 2.5-inch hot-swap bay and a SAS controller or backplane that supports 12Gb/s SAS signalling.

Will this 10K RPM SAS drive work in the same hot-swap tray as my older 10K SAS drives?

Yes, the 2.5-inch form factor and SAS interface match standard hot-swap trays used for 10K SAS drives, so it fits the same carrier.

How can I verify the drive is running at 12Gb/s after installation?

Check the controller BIOS or management utility; it should report the link speed as 12Gb/s and show the 1.8TB capacity with 10000 RPM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.