Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SAS hard drive bare unit with standard connector pins

DELL

DELL 400-AIJQ 2TB 3.5" SAS 7.2K 6Gb/s internal hard drive

SKU CH-PSPJ-KVXNY

A 3.5 inch SAS hard drive with 2TB capacity spinning at 7200 RPM for desktop storage

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity2TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • Form Factor3.5"
  • 2 TB capacity stores large data sets
  • 5 inch form factor fits standard drive bays
  • SAS interface provides reliable data transfer
  • 7200 RPM spindle speed delivers responsive performance
  • Non hot-swap design suits fixed internal installations

Dell 400-AIJQ 2TB SAS drive

This is a 3.5 inch SAS hard drive with 2TB capacity spinning at 7200 RPM. It is built for servers or workstations that require a 6Gb/s SAS connection and a non hot-swap form factor. The drive arrives as a bare unit without a mounting tray.

Verify SAS controller and bay type

Your system must provide a SAS backplane or controller that supports 6Gb/s speeds and a standard 3.5 inch internal bay. Because the unit is non hot-swap, the chassis must allow power-down installation rather than tool-less hot-swap trays. Confirm the drive cage accepts bare 3.5 inch drives without proprietary carriers.

Integrates into SAS storage arrays

The drive slots into existing SAS infrastructure using the native 6Gb/s interface and standard 3.5 inch dimensions. It adds 2TB of 7200 RPM capacity without requiring hot-swap trays or carrier adapters. This frees the builder from sourcing vendor-specific sleds while keeping the storage pool on a single SAS fabric.

Kohokohdat

  • 2 TB capacity stores large data sets
  • 5 inch form factor fits standard drive bays
  • SAS interface provides reliable data transfer
  • 7200 RPM spindle speed delivers responsive performance
  • Non hot-swap design suits fixed internal installations

Tekniset tiedot

BrandDell
Model400-AIJQ
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity2TB
RPM7200 RPM
Average Latency6Gb/s
Form Factor3.5"

Kysymyksiä tästä tuotteesta

Does the 400-AIJQ come with a mounting tray or cables, or do I need to buy them separately?

The drive is supplied as a bare 3.5 unit without a tray or cables; you will need a compatible SAS backplane or controller and mounting hardware for your chassis.

Should I choose the 2 TB 7.2K SAS model or a different capacity for a Dell server?

Select the 2 TB 7.2K SAS version when you need that exact capacity and spindle speed; other capacities or speeds are separate part numbers not covered by 400-AIJQ.

What does the 6 Gb/s SAS rating mean for actual throughput in a RAID array?

The 6 Gb/s SAS link sets the maximum interface bandwidth; sustained transfer will be limited by the 7200 RPM mechanical speed and the RAID controller overhead.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.