Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 3.5 inch SAS hard drive bare unit with standard connector pins

DELL

DELL 400-AIJQ 2TB 3.5" SAS 7.2K 6Gb/s internal hard drive

SKU CH-PSPJ-KVXNY

A 3.5 inch SAS hard drive with 2TB capacity spinning at 7200 RPM for desktop storage

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity2TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • Form Factor3.5"
  • 2 TB capacity stores large data sets
  • 5 inch form factor fits standard drive bays
  • SAS interface provides reliable data transfer
  • 7200 RPM spindle speed delivers responsive performance
  • Non hot-swap design suits fixed internal installations

Dell 400-AIJQ 2TB SAS drive

This is a 3.5 inch SAS hard drive with 2TB capacity spinning at 7200 RPM. It is built for servers or workstations that require a 6Gb/s SAS connection and a non hot-swap form factor. The drive arrives as a bare unit without a mounting tray.

Verify SAS controller and bay type

Your system must provide a SAS backplane or controller that supports 6Gb/s speeds and a standard 3.5 inch internal bay. Because the unit is non hot-swap, the chassis must allow power-down installation rather than tool-less hot-swap trays. Confirm the drive cage accepts bare 3.5 inch drives without proprietary carriers.

Integrates into SAS storage arrays

The drive slots into existing SAS infrastructure using the native 6Gb/s interface and standard 3.5 inch dimensions. It adds 2TB of 7200 RPM capacity without requiring hot-swap trays or carrier adapters. This frees the builder from sourcing vendor-specific sleds while keeping the storage pool on a single SAS fabric.

Přednosti

  • 2 TB capacity stores large data sets
  • 5 inch form factor fits standard drive bays
  • SAS interface provides reliable data transfer
  • 7200 RPM spindle speed delivers responsive performance
  • Non hot-swap design suits fixed internal installations

Specifikace

BrandDell
Model400-AIJQ
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity2TB
RPM7200 RPM
Average Latency6Gb/s
Form Factor3.5"

Otázky k tomuto produktu

Does the 400-AIJQ come with a mounting tray or cables, or do I need to buy them separately?

The drive is supplied as a bare 3.5 unit without a tray or cables; you will need a compatible SAS backplane or controller and mounting hardware for your chassis.

Should I choose the 2 TB 7.2K SAS model or a different capacity for a Dell server?

Select the 2 TB 7.2K SAS version when you need that exact capacity and spindle speed; other capacities or speeds are separate part numbers not covered by 400-AIJQ.

What does the 6 Gb/s SAS rating mean for actual throughput in a RAID array?

The 6 Gb/s SAS link sets the maximum interface bandwidth; sustained transfer will be limited by the 7200 RPM mechanical speed and the RAID controller overhead.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.