Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-AKLS 1.8TB 2.5" SAS 12Gb/s 10K internal hard drive

SKU CH-X6PS-4F7ZP

A 1.8 TB SAS drive spinning at 10000 RPM with a 12 Gb/s interface in a 2.5 inch hot-swap form factor

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • High-capacity 1.8TB storage for demanding server workloads
  • Fast 10000 RPM spindle speed reduces data access latency
  • SAS 12Gb/s interface delivers high-throughput enterprise connectivity
  • 5-inch hot-swap form factor enables tool-less drive replacement
  • Genuine Dell 400-AKLS part ensures validated firmware compatibility

Dell 400-AKLS 1.8TB SAS drive

The Dell 400-AKLS is a new 1.8TB internal hard drive built for Dell servers and storage arrays. It uses a 2.5 inch form factor with a SAS 12Gb/s interface and spins at 10000 RPM. The drive ships as a bare unit with a hot-swap tray for direct bay insertion.

Suits SAS 12Gb/s bays needing 10K speed

This drive fits administrators who need 1.8TB of capacity on a 12Gb/s SAS backplane with 10000 RPM performance. It is not for systems that only accept 3.5 inch form factors or interfaces other than SAS. Buyers requiring larger capacities or solid-state media should consider other options.

SAS 12Gb/s interface at 10000 RPM

The single specification that decides fit is the SAS 12Gb/s interface combined with 10000 RPM rotational speed. The drive must connect to a compatible SAS controller or backplane running at 12Gb/s to operate as intended. Without that specific interface and speed match the drive will not function in the target system.

Kohokohdat

  • High-capacity 1.8TB storage for demanding server workloads
  • Fast 10000 RPM spindle speed reduces data access latency
  • SAS 12Gb/s interface delivers high-throughput enterprise connectivity
  • 5-inch hot-swap form factor enables tool-less drive replacement
  • Genuine Dell 400-AKLS part ensures validated firmware compatibility

Tekniset tiedot

BrandDell
Model400-AKLS
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Kysymyksiä tästä tuotteesta

What limits sustained throughput first on this 10000 RPM SAS drive?

The 10000 RPM rotational speed limits sustained throughput before the SAS 12Gb/s interface becomes the bottleneck.

How much noise and heat does this 2.5 inch 10000 RPM drive produce during all-day operation?

A 10000 RPM 2.5 inch drive generates noticeable mechanical noise and heat under continuous load, requiring adequate chassis airflow.

Which controller or backplane must I already have to use this SAS 12Gb/s hot-swap drive?

You need a SAS 12Gb/s controller or backplane with a 2.5 inch hot-swap bay that accepts the drive tray.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.