Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Silver 2.5 inch SAS hard drive with hot-swap tray

DELL

DELL 400-AKLS 1.8TB 2.5" SAS 12Gb/s 10K internal hard drive

SKU CH-X6PS-4F7ZP

A 1.8 TB SAS drive spinning at 10000 RPM with a 12 Gb/s interface in a 2.5 inch hot-swap form factor

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency12Gb/s
  • Form Factor2.5"
  • High-capacity 1.8TB storage for demanding server workloads
  • Fast 10000 RPM spindle speed reduces data access latency
  • SAS 12Gb/s interface delivers high-throughput enterprise connectivity
  • 5-inch hot-swap form factor enables tool-less drive replacement
  • Genuine Dell 400-AKLS part ensures validated firmware compatibility

Dell 400-AKLS 1.8TB SAS drive

The Dell 400-AKLS is a new 1.8TB internal hard drive built for Dell servers and storage arrays. It uses a 2.5 inch form factor with a SAS 12Gb/s interface and spins at 10000 RPM. The drive ships as a bare unit with a hot-swap tray for direct bay insertion.

Suits SAS 12Gb/s bays needing 10K speed

This drive fits administrators who need 1.8TB of capacity on a 12Gb/s SAS backplane with 10000 RPM performance. It is not for systems that only accept 3.5 inch form factors or interfaces other than SAS. Buyers requiring larger capacities or solid-state media should consider other options.

SAS 12Gb/s interface at 10000 RPM

The single specification that decides fit is the SAS 12Gb/s interface combined with 10000 RPM rotational speed. The drive must connect to a compatible SAS controller or backplane running at 12Gb/s to operate as intended. Without that specific interface and speed match the drive will not function in the target system.

Puncte forte

  • High-capacity 1.8TB storage for demanding server workloads
  • Fast 10000 RPM spindle speed reduces data access latency
  • SAS 12Gb/s interface delivers high-throughput enterprise connectivity
  • 5-inch hot-swap form factor enables tool-less drive replacement
  • Genuine Dell 400-AKLS part ensures validated firmware compatibility

Specificații

BrandDell
Model400-AKLS
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency12Gb/s
Form Factor2.5"

Întrebări despre acest articol

What limits sustained throughput first on this 10000 RPM SAS drive?

The 10000 RPM rotational speed limits sustained throughput before the SAS 12Gb/s interface becomes the bottleneck.

How much noise and heat does this 2.5 inch 10000 RPM drive produce during all-day operation?

A 10000 RPM 2.5 inch drive generates noticeable mechanical noise and heat under continuous load, requiring adequate chassis airflow.

Which controller or backplane must I already have to use this SAS 12Gb/s hot-swap drive?

You need a SAS 12Gb/s controller or backplane with a 2.5 inch hot-swap bay that accepts the drive tray.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.