Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch enterprise hard drive with hot-swap tray

DELL

DELL 400-ANVH 10TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-JFFY-JHJWW

A 10 TB 3.5-inch SAS 12 Gb/s 7200 RPM enterprise hard drive with hot-swap support

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity10TB
  • RPM7200 RPM
  • Average Latency12Gb/s
  • UsageFor Enterprise Storage
  • 10 TB capacity supports large-scale data storage
  • SAS 12 Gb/s interface enables fast enterprise transfers
  • 7200 RPM spindle speed delivers consistent nearline performance
  • 5 inch form factor fits standard server bays
  • Hot-swap tray allows drive replacement without downtime

Dell 400-ANVH 10TB Nearline SAS Drive

The Dell 400-ANVH is a new 10TB 3.5-inch internal hard drive built for enterprise storage arrays. It uses a Nearline SAS interface running at 12Gb/s with a 7200 RPM spindle speed and supports hot-swap installation.

Suits arrays needing 12Gb/s SAS connectivity.

This drive fits servers and storage enclosures that accept 3.5-inch SAS drives with hot-swap trays. Buyers whose systems only support different drive interfaces or smaller form factors should look at other options.

12Gb/s SAS interface determines compatibility

The single specification that decides fitment is the 12Gb/s SAS interface. The host backplane and controller must support this exact protocol and speed for the drive to function correctly.

Kohokohdat

  • 10 TB capacity supports large-scale data storage
  • SAS 12 Gb/s interface enables fast enterprise transfers
  • 7200 RPM spindle speed delivers consistent nearline performance
  • 5 inch form factor fits standard server bays
  • Hot-swap tray allows drive replacement without downtime

Tekniset tiedot

BrandDell
Model400-ANVH
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity10TB
RPM7200 RPM
Average Latency12Gb/s
UsageFor Enterprise Storage
Form Factor3.5"

Kysymyksiä tästä tuotteesta

Does my server need a 12 Gb/s SAS backplane or controller to use this 10 TB drive?

Yes, the drive connects through a SAS 12 Gb/s interface, so the host must provide a compatible SAS port or backplane running at that speed.

Can I keep my existing 6 Gb/s SAS drives in the same enclosure with this 7.2 K RPM model?

The drive supports the 12 Gb/s SAS standard, which is backward compatible with 6 Gb/s SAS infrastructure, allowing mixed-speed operation.

How can I confirm the 7200 RPM spindle is running correctly after installation?

Check the drive’s SMART attributes or the RAID controller’s physical-drive view for the reported rotation speed and verify no seek-error counts are increasing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.