Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2.5 inch internal hard drive with SAS connector

DELL

DELL 400-ATJR 1.8TB 10K SAS 12Gb/s 2.5" laptop hard drive

SKU CH-RDKM-TVZ01

1.8TB 10000 RPM SAS 12Gb/s 2.5" internal hard drive for fast data access in compatible systems

  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • NAND Flash Memory TypeHard Drive
  • RPM10000 RPM
  • FeaturesOffers - 1.8TB capacity to store large amount of data SAS in
  • Form Factor2.5"
  • 8 TB capacity stores large amounts of data
  • SAS 12 Gb/s interface delivers high transfer speeds
  • 10 000 RPM spindle ensures excellent performance
  • 5 inch form factor fits laptop bays
  • Hot-swappable design allows drive replacement without shutdown

Dell 400-ATJR 1.8TB SAS 12Gb/s drive

This 1.8TB internal hard drive uses a SAS 12Gb/s interface and spins at 10000 RPM. It fits a 2.5-inch hot-swap bay and is supplied new. The 512e format provides high capacity for demanding storage arrays.

Suits servers needing fast 10K SAS storage

This drive suits administrators who need 10000 RPM performance over a 12Gb/s SAS link in a 2.5-inch form factor. It is not for systems that lack a SAS controller or backplane. Buyers who require 512n native sector support should look elsewhere. VMware environments cannot use this 512e drive.

Critical spec: SAS 12Gb/s interface

The drive communicates exclusively through a SAS 12Gb/s connection. A compatible SAS host bus adapter or RAID controller is mandatory for operation. The 512e sector format requires Windows Server 2008 R2 or later, UEFI boot on Windows Server 2012, or supported Linux distributions.

Kohokohdat

  • 8 TB capacity stores large amounts of data
  • SAS 12 Gb/s interface delivers high transfer speeds
  • 10 000 RPM spindle ensures excellent performance
  • 5 inch form factor fits laptop bays
  • Hot-swappable design allows drive replacement without shutdown

Tekniset tiedot

BrandDell
Model400-ATJR
InterfaceSAS 12Gb/s
Capacity1.8TB
NAND Flash Memory TypeHard Drive
RPM10000 RPM
FeaturesOffers - 1.8TB capacity to store large amount of data
SAS interface delivers high data transfer speeds
10K RPM spindle speed ensures excellent performance
Form Factor2.5"

Kysymyksiä tästä tuotteesta

Will this 1.8TB 10K SAS 12Gb/s drive work in a server that currently uses 2.5-inch 6Gb/s SAS drives?

The drive uses the SAS 12Gb/s interface, which is backward compatible with 6Gb/s SAS backplanes. It fits the same 2.5-inch hot-swap bays, so it can be added alongside existing 6Gb/s drives without hardware changes.

How can I verify the 10,000 RPM spindle speed and 12Gb/s link are active after installation?

Check the controller BIOS or management utility; it should report the negotiated link speed as 12Gb/s and the drive model 400-ATJR with a 10,000 RPM spindle. SMART data will also confirm the rotational speed.

Does the 400-ATJR ship with a drive tray or caddy, or must I supply my own?

The drive is supplied as a bare 2.5-inch hot-plug unit. Dell servers require a generation-specific drive tray or caddy, which is not included and must be purchased separately if your chassis does not already have one.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.