Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SAS hybrid hard drive with Dell label

DELL

DELL 400-ATJS 1.8TB 3.5" 12Gb/s SAS 10K RPM 512e hybrid internal hard drive

SKU CH-Y6WG-0T3A8

A 1.8 TB 3.5-inch SAS hybrid drive spinning at 10000 RPM with a 12 Gb/s interface

  • InterfaceSAS 12Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Form Factor3.5"
  • 10,000 RPM spindle delivers fast data access
  • 12 Gb/s SAS interface enables high-throughput transfers
  • 8 TB capacity stores large enterprise datasets
  • 512e hybrid format boosts storage efficiency
  • 5-inch form factor fits standard server bays

Dell 400-ATJS 1.8TB SAS hybrid drive

The Dell 400-ATJS is a 1.8TB hybrid hard drive with a SAS 12Gb/s interface. It spins at 10000 RPM in a 3.5 inch form factor. The drive uses 512e sector formatting for broad compatibility. It is supplied new in retail or OEM packaging.

Suits servers needing high-speed SAS storage

This drive suits servers and storage arrays that require 12Gb/s SAS connectivity and 10000 RPM performance. The hybrid design helps accelerate frequent read workloads. It is not for systems that lack a SAS controller or backplane. It is not for laptops or small-form-factor builds that cannot accept a 3.5 inch drive.

The SAS 12Gb/s interface decides fit

The single specification that decides fit is the SAS 12Gb/s interface. Your host bus adapter, RAID controller or backplane must support 12Gb/s SAS to use this drive. Without a compatible SAS connection the drive will not function. Verify the interface before purchase.

Kohokohdat

  • 10,000 RPM spindle delivers fast data access
  • 12 Gb/s SAS interface enables high-throughput transfers
  • 8 TB capacity stores large enterprise datasets
  • 512e hybrid format boosts storage efficiency
  • 5-inch form factor fits standard server bays

Tekniset tiedot

InterfaceSAS 12Gb/s
Capacity1.8TB
RPM10000 RPM
Form Factor3.5"

Kysymyksiä tästä tuotteesta

How is the 3.5" SAS drive installed, and which step is often missed?

Mount the drive in a 3.5" bay, connect the SAS data cable to a 12Gb/s controller and attach the power connector; the step often missed is confirming the controller firmware recognises the 512e sector format before array creation.

What maintenance or replacement will the 10000 RPM hybrid drive need later?

The mechanical platters and flash cache have finite endurance; plan replacement when SMART reallocated sectors rise or when sustained write latency exceeds the service-level target.

What limit appears first on the 1.8TB SAS drive during sustained workloads?

The 12Gb/s SAS link and 10000 RPM spindle cap sustained throughput; the flash tier absorbs bursts, but continuous heavy writes saturate the mechanical media first.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.