Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2.5 inch SAS hard drive with hot-swap tray, new condition

DELL

DELL 400-AVVV 300GB 2.5" SAS 15000 RPM 12Gb/s internal hard drive

SKU CH-WDB5-RCBE3

A 300 GB 2.5-inch SAS hard drive spinning at 15 000 RPM with a 12 Gb/s interface and hot-swap tray

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity300GB
  • RPM15000 RPM
  • Form Factor2.5"
  • 15000 RPM spindle delivers rapid data access
  • 12Gb/s SAS interface enables high-throughput transfers
  • 300GB capacity stores critical workloads
  • 5-inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

Dell 400-AVVV 300GB SAS drive

The Dell 400-AVVV is a 300GB 2.5 inch SAS hard drive spinning at 15000 RPM with a 12Gb/s interface. It is built for servers and storage arrays that need fast, reliable access to transactional data. The hot-swap tray allows replacement without powering down the chassis. This drive suits administrators who prioritise consistent throughput over maximum capacity.

Thermals noise and power in normal use

At 15000 RPM the spindle generates measurable heat and audible whine typical of enterprise 2.5 inch SAS drives. Power draw sits above slower nearline disks but remains within the envelope for standard drive bays. System fans usually mask the acoustic signature in a rack environment. No specific thermal or acoustic figures are published by the manufacturer.

Behaviour under sustained load

The 15000 RPM spindle maintains steady random IOPS during prolonged database or virtualisation workloads. SAS 12Gb/s bandwidth prevents the interface from becoming the bottleneck during sequential transfers. Write latency stays predictable because the drive lacks the garbage-collection pauses seen in flash media. Workloads needing larger sequential throughput or silent operation should consider alternative media.

Kohokohdat

  • 15000 RPM spindle delivers rapid data access
  • 12Gb/s SAS interface enables high-throughput transfers
  • 300GB capacity stores critical workloads
  • 5-inch form factor fits dense server bays
  • Hot-swap tray allows drive replacement without downtime

Tekniset tiedot

BrandDell
Model400-AVVV
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity300GB
RPM15000 RPM
Form Factor2.5"

Kysymyksiä tästä tuotteesta

How do I install the Dell 400-AVVV 2.5" SAS drive in a hot-swap bay, and which step is often missed?

Slide the drive into the hot-swap tray until the SAS connector seats firmly, then lock the lever; the step often missed is fully engaging the lever so the 12Gb/s link trains at 15000 RPM.

What maintenance or replacement will the Dell 400-AVVV 300GB SAS drive need later?

As a 15000 RPM mechanical drive, it will eventually need replacement when bearing wear or media errors appear; no user-serviceable parts exist, so plan a spare 300GB SAS unit.

What limit appears first on the Dell 400-AVVV 15K SAS drive under sustained write loads?

The 12Gb/s SAS interface and 15000 RPM spindle set the sustained throughput ceiling; thermal throttling or write latency spikes typically hit before the 300GB capacity fills.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.