Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SAS hard drive bare drive no tray visible

DELL

DELL F617N 300GB 15000 RPM 16MB SAS 3.5" internal hard drive

SKU CH-E0V9-JG9F3 MPN F617N

A 300 GB 3.5-inch SAS hard drive spinning at 15000 RPM with 16 MB cache for server workloads

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity300GB
  • NAND Flash Memory TypeHard Drive
  • RPM15000 RPM
  • Cache16MB
  • 15,000 RPM spindle speed enables rapid data access
  • 16 MB cache buffers bursts for smoother throughput
  • SAS 6 Gb/s interface connects directly to server backplanes
  • 300 GB capacity stores critical workloads on a single drive
  • 5-inch hot-swap form factor simplifies rack maintenance

Server-grade SAS drive

The Dell F617N is a 300 GB 3.5 inch internal hard drive with a SAS 6Gb/s interface. It spins at 15000 RPM and provides 16 MB of cache for low-latency data access. The bare-drive unit is built for hot-swap trays in enterprise enclosures. Condition is new.

Best for high-IO server workloads

This drive suits administrators who need fast, reliable storage for transactional databases or virtualisation hosts. The 15K spindle speed and SAS interface deliver the consistent throughput those tasks demand. Buyers who need larger capacities or lower-cost archival storage should look elsewhere.

15000 RPM spindle speed

The 15000 RPM rotation rate is the specification that determines whether this drive meets your performance target. It directly governs the 2 ms average latency and the sustained throughput available to the SAS 6Gb/s bus. If your workload requires that level of random-access speed, this model fits; if not, a slower spindle will be more economical.

Kohokohdat

  • 15,000 RPM spindle speed enables rapid data access
  • 16 MB cache buffers bursts for smoother throughput
  • SAS 6 Gb/s interface connects directly to server backplanes
  • 300 GB capacity stores critical workloads on a single drive
  • 5-inch hot-swap form factor simplifies rack maintenance

Tekniset tiedot

BrandDell
ModelF617N
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity300GB
NAND Flash Memory TypeHard Drive
RPM15000 RPM
Cache16MB
Average Latency2ms
UsageIdeal for Servers
Form Factor3.5"
Lähetyspaino1.81 kg
Pakkauksen mitat292 × 229 × 145 mm

Kysymyksiä tästä tuotteesta

What comes with the Dell F617N 300GB 15000 RPM SAS drive and what must be purchased separately?

The product is a bare drive only; no mounting tray, cables, screws or adapter are included. You will need a compatible 3.5" SAS backplane or controller, plus any required cabling, to install it.

Which capacity and speed version of the F617N should I choose for a server that needs maximum throughput?

This model is offered as a single 300GB 15000 RPM configuration with 16MB cache and a SAS 6Gb/s interface; there are no alternative capacities or speeds listed for the F617N part number.

What does the 15000 RPM figure mean for real-world server performance with this drive?

The 15000 RPM spindle speed and 2ms average latency give very fast random access, making the 300GB SAS drive well suited for transaction-heavy server workloads such as databases or virtualisation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.