Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SATA hard drive bare drive

DELL

DELL K4M5W 1TB 3.5" SATA 7200 RPM internal hard drive

SKU CH-TCHB-1F1VC

1 TB 3.5" SATA 7200 RPM internal hard drive for Dell PowerVault NX440 systems

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity1TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 1TB capacity for desktop storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0Gb/s interface for broad motherboard compatibility
  • 5-inch form factor fits standard drive bays
  • Dell part K4M5W validated for PowerVault NX440 systems

Dell K4M5W 1TB 3.5" SATA 7200 RPM Hard Drive

The Dell K4M5W is a 1TB internal hard drive built for desktop systems that require a 3.5 inch SATA drive spinning at 7200 RPM. It suits users replacing a failed drive or adding bulk storage to a compatible Dell PowerVault NX440 or similar desktop chassis.

Build quality and connectors

The bare drive uses a standard SATA 6.0Gb/s interface and a 3.5 inch form factor, so it fits regular desktop drive bays and connects with ordinary SATA data and power cables. No special brackets or adapters are required for standard mounting points.

Upgrade context

This drive replaces a lower-capacity or slower SATA hard drive in supported Dell systems, delivering 1TB at 7200 RPM over a 6Gb/s link. The jump is worthwhile when the existing drive limits storage space or throughput for everyday desktop workloads.

Kohokohdat

  • 1TB capacity for desktop storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0Gb/s interface for broad motherboard compatibility
  • 5-inch form factor fits standard drive bays
  • Dell part K4M5W validated for PowerVault NX440 systems

Tekniset tiedot

BrandDell
ModelK4M5W
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity1TB
RPM7200 RPM
Form Factor3.5"

Kysymyksiä tästä tuotteesta

What maximum throughput does the SATA 6.0 Gb/s interface deliver in practice?

The SATA 6.0 Gb/s interface caps at 600 MB/s, so sequential reads and writes cannot exceed that ceiling.

Which drive bay and screw pattern does the 3.5" form factor require?

It fits a standard 3.5-inch internal bay using the industry-standard bottom and side mounting holes.

How is the drive installed in a PowerVault NX440, and which step is often missed?

Slide the bare drive into the hot-swap carrier, secure it with the carrier screws, then insert the carrier until the latch clicks — many forget to fully seat the latch.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.