暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

DELL

DELL K4M5W 1TB 3.5" SATA 7200 RPM internal hard drive

SKU CH-TCHB-1F1VC

1 TB 3.5" SATA 7200 RPM internal hard drive for Dell PowerVault NX440 systems

  • PackagingBare Drive
  • InterfaceSATA 6.0Gb/s
  • Capacity1TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 1TB capacity for desktop storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0Gb/s interface for broad motherboard compatibility
  • 5-inch form factor fits standard drive bays
  • Dell part K4M5W validated for PowerVault NX440 systems

Dell K4M5W 1TB 3.5" SATA 7200 RPM Hard Drive

The Dell K4M5W is a 1TB internal hard drive built for desktop systems that require a 3.5 inch SATA drive spinning at 7200 RPM. It suits users replacing a failed drive or adding bulk storage to a compatible Dell PowerVault NX440 or similar desktop chassis.

Build quality and connectors

The bare drive uses a standard SATA 6.0Gb/s interface and a 3.5 inch form factor, so it fits regular desktop drive bays and connects with ordinary SATA data and power cables. No special brackets or adapters are required for standard mounting points.

Upgrade context

This drive replaces a lower-capacity or slower SATA hard drive in supported Dell systems, delivering 1TB at 7200 RPM over a 6Gb/s link. The jump is worthwhile when the existing drive limits storage space or throughput for everyday desktop workloads.

特長

  • 1TB capacity for desktop storage
  • 7200 RPM spindle speed for responsive data access
  • SATA 6.0Gb/s interface for broad motherboard compatibility
  • 5-inch form factor fits standard drive bays
  • Dell part K4M5W validated for PowerVault NX440 systems

仕様

BrandDell
ModelK4M5W
PackagingBare Drive
InterfaceSATA 6.0Gb/s
Capacity1TB
RPM7200 RPM
Form Factor3.5"

この商品に関する質問

What maximum throughput does the SATA 6.0 Gb/s interface deliver in practice?

The SATA 6.0 Gb/s interface caps at 600 MB/s, so sequential reads and writes cannot exceed that ceiling.

Which drive bay and screw pattern does the 3.5" form factor require?

It fits a standard 3.5-inch internal bay using the industry-standard bottom and side mounting holes.

How is the drive installed in a PowerVault NX440, and which step is often missed?

Slide the bare drive into the hot-swap carrier, secure it with the carrier screws, then insert the carrier until the latch clicks — many forget to fully seat the latch.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。