Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Half-height blade server, matte black finish, two 2.5-inch drive bays visible

DELL

DELL PowerEdge M640 Blade Server 2x Xeon 8160 24C 16GB 2x 960GB SSD 57810S-K iDRAC9 Ent

SKU CH-B9CS-8A7PS

Dual-socket blade server with two 24-core Xeon 8160 processors, 16GB DDR4, dual 960GB SSDs and iDRAC9 Enterprise management

  • TypeBlade
  • Rack HeightBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.10 GHz
  • CPU SocketLGA 3647
  • Number of CPU Cores24-Core Processor

Installed Memory Size 16GB

SSD (Installed) 2 x 960GB SATA SSD

  • Dual 24-core Xeon 8160 CPUs deliver 56 cores total for heavy compute
  • 16GB DDR4 2666MHz ECC memory scales to 1.5TB capacity
  • 2x 960GB SATA SSDs on PERC S140 controller with RAID 0/1/5/10
  • Broadcom 57810S-K dual 10Gb ports for high-speed blade networking
  • iDRAC9 Enterprise enables remote management and automation

Blade Server for Dense Compute

The Dell PowerEdge M640 is a half-height blade server built for high-density data centre deployments. It ships with two Intel Xeon Platinum 8160 processors, each running at 2.10 GHz with a 3.7 GHz turbo frequency. Sixteen gigabytes of DDR4 registered ECC memory are installed across two modules. The platform fits into PowerEdge MX or M1000e chassis for shared power and cooling.

Suited for Virtualisation and HPC Clusters

This configuration targets organisations running virtualisation, private cloud or high-performance computing workloads that benefit from many cores in a small footprint. The dual 24-core CPUs and 10 Gb dual-port networking support scale-out architectures. Buyers who need large local storage capacity or GPU acceleration should look at alternative platforms because the blade provides only two 2.5-inch drive bays and a Matrox G200 graphics controller with 8 MB video memory.

Storage Controller Determines Drive Options

The integrated Dell PERC S140 controller manages the two installed 960 GB SATA SSDs and supports RAID 0, 1, 5 and 10 across SATA and SAS interfaces. NVMe drives are also supported by the controller for future upgrades. The single specification that decides fit is whether the S140 RAID feature set meets the redundancy and performance requirements of the intended workload.

Kohokohdat

  • Dual 24-core Xeon 8160 CPUs deliver 56 cores total for heavy compute
  • 16GB DDR4 2666MHz ECC memory scales to 1.5TB capacity
  • 2x 960GB SATA SSDs on PERC S140 controller with RAID 0/1/5/10
  • Broadcom 57810S-K dual 10Gb ports for high-speed blade networking
  • iDRAC9 Enterprise enables remote management and automation

Tekniset tiedot

BrandDELL
SeriesPowerEdge M640
TypeBlade
Rack HeightBlade
CPU TypeIntel Xeon
CPU Speed2.10 GHz
CPU SocketLGA 3647
Number of CPU Cores24-Core Processor
# of Processors Installed2
MAX Processors2
Installed Memory Size16GB
Memory TypeDDR4
Max Memory Capacity2TB
Number of Memory Slots16
Storage ControllerDell Perc S140 Controller
HDD InterfaceSATA/SAS
SSD (Installed)2 x 960GB SATA SSD
Raid LevelRAID 0/1/5/10
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card
Management PortRJ 45
Operating SystemNo

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the dual Xeon 8160 processors and 16GB DDR4 are recognised after installing the blade into an M1000e chassis?

The iDRAC9 Enterprise interface will display both 24-core CPUs at 2.1GHz and the 16GB registered ECC memory in its hardware inventory once the blade powers on.

Which components ship with the M640 blade and what must I supply separately?

The blade includes two Xeon 8160 processors, 16GB DDR4, two 960GB SATA SSDs, the PERC S140 controller and the 57810S-K 10Gb dual-port network card; you must provide a compatible M1000e or MX chassis and any additional memory or drives.

Should I choose this 16GB configuration or add more DDR4 modules to reach the 2TB maximum?

Start with the installed 16GB if your workload fits; the blade has 16 DDR4 slots supporting up to 2TB total, so you can add registered ECC modules later as demand grows.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.