DELL PowerEdge M640 Blade Server 2x Xeon Gold 6150 18C 16GB 2x960GB SSD
- Blade
- Blade
DELL
Dual-socket blade server with two 24-core Xeon 8160 processors, 16GB DDR4, dual 960GB SSDs and iDRAC9 Enterprise management
SSD (Installed) 2 x 960GB SATA SSD
The Dell PowerEdge M640 is a half-height blade server built for high-density data centre deployments. It ships with two Intel Xeon Platinum 8160 processors, each running at 2.10 GHz with a 3.7 GHz turbo frequency. Sixteen gigabytes of DDR4 registered ECC memory are installed across two modules. The platform fits into PowerEdge MX or M1000e chassis for shared power and cooling.
This configuration targets organisations running virtualisation, private cloud or high-performance computing workloads that benefit from many cores in a small footprint. The dual 24-core CPUs and 10 Gb dual-port networking support scale-out architectures. Buyers who need large local storage capacity or GPU acceleration should look at alternative platforms because the blade provides only two 2.5-inch drive bays and a Matrox G200 graphics controller with 8 MB video memory.
The integrated Dell PERC S140 controller manages the two installed 960 GB SATA SSDs and supports RAID 0, 1, 5 and 10 across SATA and SAS interfaces. NVMe drives are also supported by the controller for future upgrades. The single specification that decides fit is whether the S140 RAID feature set meets the redundancy and performance requirements of the intended workload.
| Brand | DELL |
|---|---|
| Series | PowerEdge M640 |
| Type | Blade |
| Rack Height | Blade |
| CPU Type | Intel Xeon |
| CPU Speed | 2.10 GHz |
| CPU Socket | LGA 3647 |
| Number of CPU Cores | 24-Core Processor |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 16GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 2TB |
| Number of Memory Slots | 16 |
| Storage Controller | Dell Perc S140 Controller |
| HDD Interface | SATA/SAS |
| SSD (Installed) | 2 x 960GB SATA SSD |
| Raid Level | RAID 0/1/5/10 |
| GPU Type | Matrox G200 |
| Video Memory | 8MB |
| Ethernet Controller | Dell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card |
| Management Port | RJ 45 |
| Operating System | No |
이 모델의 다른 버전
같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.
The iDRAC9 Enterprise interface will display both 24-core CPUs at 2.1GHz and the 16GB registered ECC memory in its hardware inventory once the blade powers on.
The blade includes two Xeon 8160 processors, 16GB DDR4, two 960GB SATA SSDs, the PERC S140 controller and the 57810S-K 10Gb dual-port network card; you must provide a compatible M1000e or MX chassis and any additional memory or drives.
Start with the installed 16GB if your workload fits; the blade has 16 DDR4 slots supporting up to 2TB total, so you can add registered ECC modules later as demand grows.
이 진열대의 다른 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
결제할 코인과 가격을 확인할 통화입니다.
체크아웃 시 지갑에서 전송됩니다.
표시 전용 — 카탈로그 가격은 달러 기준입니다.
일치하는 통화가 없습니다.
사이트에서 사용할 언어를 선택하십시오.
일치하는 언어가 없습니다.
처음 방문하셨나요?
이미 계정이 있으신가요?
자동 재설정 기능은 없습니다. 이 쇼핑몰은 어떠한 메일도 보내지 않으므로 요청할 일회용 링크 자체가 없습니다. 계정에 등록된 이메일 주소를 그대로 두시면 담당자가 직접 확인해 처리합니다.
요청 접수
받은편지함으로 오는 것은 아무것도 없습니다 — 이 쇼핑몰은 메일을 전혀 보내지 않습니다. 담당자가 직접 확인해 처리합니다.
기억나셨나요?