Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Dell PowerEdge R630 1U rack server silver front ten 2.5 inch drive bays

DELL

DELL PowerEdge R630 10SFF 1x Xeon E5-2650v4 384GB DDR4 No Drive

SKU CH-5PWV-P6V7S

A 1U rack server with ten 2.5" drive bays, one 2.2GHz 12-core Xeon processor and 384GB DDR4 ECC memory

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size384GB
  • 12-core Xeon E5-2650v4 at 2.2 GHz for strong multi-threaded performance
  • 384 GB DDR4 ECC memory supports large virtualisation workloads
  • 10 front 2.5" drive bays with PERC H730 SAS controller for flexible storage
  • iDRAC8 Enterprise licence enables full remote management
  • Dual 495 W power supplies provide redundancy for uptime

PowerEdge R630 10SFF Server

The Dell PowerEdge R630 is a 1U rack server that holds up to ten 2.5-inch drives. It ships with one Xeon E5-2650v4 processor running at 2.2 GHz with twelve cores and 30 MB cache. The system includes 384 GB of DDR4 ECC registered memory and a PERC H730 SAS controller. Integrated graphics and iDRAC8 Enterprise remote management are built in.

Compatibility Check Before Ordering

Verify that your rack provides 36 inches of depth and 24 inches of width for the chassis. Confirm the power infrastructure can support two 495 W supplies. Ensure any drives you plan to add use a SATA or SAS interface compatible with the PERC H730 controller. The board accepts a second Xeon processor if additional compute capacity is required later.

Sustained Load Behaviour

Dual 495 W power supplies share the load and provide redundancy during continuous operation. The PERC H730 controller maintains consistent throughput for RAID arrays under heavy I/O. iDRAC8 Enterprise allows remote monitoring of thermals and power draw without interrupting the host. Memory runs at DDR4 speeds with ECC correction active throughout extended workloads.

Kohokohdat

  • 12-core Xeon E5-2650v4 at 2.2 GHz for strong multi-threaded performance
  • 384 GB DDR4 ECC memory supports large virtualisation workloads
  • 10 front 2.5" drive bays with PERC H730 SAS controller for flexible storage
  • iDRAC8 Enterprise licence enables full remote management
  • Dual 495 W power supplies provide redundancy for uptime

Tekniset tiedot

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)3,84
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

Does the R630 10SFF arrive with drives or caddies, or must I supply them?

The server ships with no drives installed; the ten 2.5-inch bays are empty, so you provide the SATA drives and any caddies you need.

Should I select the single E5-2650v4 now or plan for a second CPU later?

One Xeon E5-2650v4 at 2.2 GHz with 12 cores and 30 MB cache is installed; a second socket is free if you need up to two processors.

How much of the 384 GB DDR4 is usable after the OS and iDRAC8 reserve their share?

All 384 GB of DDR4 ECC registered memory is available to the operating system; the iDRAC8 Enterprise license runs on its own dedicated controller.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.