DELL PowerEdge R630 10SFF 1x Xeon E5-2650v4 384GB DDR4 No Drive

PowerEdge R630 10SFF Server

The Dell PowerEdge R630 is a 1U rack server that holds up to ten 2.5-inch drives. It ships with one Xeon E5-2650v4 processor running at 2.2 GHz with twelve cores and 30 MB cache. The system includes 384 GB of DDR4 ECC registered memory and a PERC H730 SAS controller. Integrated graphics and iDRAC8 Enterprise remote management are built in.

Compatibility Check Before Ordering

Verify that your rack provides 36 inches of depth and 24 inches of width for the chassis. Confirm the power infrastructure can support two 495 W supplies. Ensure any drives you plan to add use a SATA or SAS interface compatible with the PERC H730 controller. The board accepts a second Xeon processor if additional compute capacity is required later.

Sustained Load Behaviour

Dual 495 W power supplies share the load and provide redundancy during continuous operation. The PERC H730 controller maintains consistent throughput for RAID arrays under heavy I/O. iDRAC8 Enterprise allows remote monitoring of thermals and power draw without interrupting the host. Memory runs at DDR4 speeds with ECC correction active throughout extended workloads.