Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL PowerEdge R730 2U 8 Bay 2x Xeon E5-2660 v3 2.6GHz 10 Core 256GB DDR4 H730 2x 400GB SSD

SKU CH-D8VD-DY8S5

Dual 10-core Xeon 2.6 GHz server with 256 GB DDR4, PERC H730 RAID and two 400 GB SSDs in a 2U rack chassis

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.60 GHz
  • CPU SocketLGA 2011-3
  • Dual 10-core Xeon processors at 2.6 GHz with 3.3 GHz turbo
  • 256 GB DDR4 registered ECC memory across eight 32 GB modules
  • PERC H730 controller supports RAID 0, 1, 5, 6, 10, 50, 60
  • Dual 400 GB SATA SSDs for fast storage access
  • Quad-port network card with two 1 GbE and two 10 Gb SFP+ ports

Dual Xeon 10-core 2U server

This new Dell PowerEdge R730 is a 2U rack server fitted with two Intel Xeon E5-2660 v3 processors. Each CPU runs at 2.6 GHz with a 3.3 GHz turbo and provides ten cores, giving twenty cores in total. The system includes 256 GB of DDR4 registered ECC memory across eight 32 GB modules and a PERC H730 storage controller with 1 GB cache.

Suits virtualisation and database nodes.

The server targets midsize and large enterprises running virtual desktop infrastructure, databases, data warehousing or high-performance computing as a data node. Quad-port networking with two 1 GbE and two 10 Gb SFP+ ports plus iDRAC 8 Enterprise remote management support dense, managed deployments. Buyers who need GPU acceleration or more than two processors should consider a different platform.

8-bay 2.5-inch chassis

Eight hot-swap 2.5-inch drive bays are populated with two 400 GB SATA SSDs and the PERC H730 controller supports RAID 0, 1, 5, 6, 10, 50, 60 and pass-through. Two 750 W platinum hot-swap power supplies provide redundancy. The chassis includes ready rails and a front bezel, and memory can be expanded to 1.5 TB across twenty-four DDR4 slots.

Kohokohdat

  • Dual 10-core Xeon processors at 2.6 GHz with 3.3 GHz turbo
  • 256 GB DDR4 registered ECC memory across eight 32 GB modules
  • PERC H730 controller supports RAID 0, 1, 5, 6, 10, 50, 60
  • Dual 400 GB SATA SSDs for fast storage access
  • Quad-port network card with two 1 GbE and two 10 Gb SFP+ ports

Tekniset tiedot

BrandDELL
SeriesPowerEdge R730
ModelR730
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.60 GHz
CPU SocketLGA 2011-3
Number of CPU Cores10-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSATA
SSD (Installed)2 x 400GB SATA SSD
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features8 x 2.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I pick the 256 GB DDR4 configuration or add more memory later?

The system ships with 256 GB across eight 32 GB DDR4 2133 MHz registered ECC modules and has 24 slots total, so you can expand up to 1.5 TB if workloads grow.

What does the 2.6 GHz Xeon E5-2660 v3 speed deliver in daily use?

Each of the two 10-core processors runs at 2.6 GHz base and can turbo to 3.3 GHz, giving strong multi-threaded throughput for virtualization, databases and HPC nodes.

How does the PERC H730 controller limit drive performance?

The H730 1 GB mini controller supports 12 Gb/s SAS and SATA with RAID 0/1/5/6/10/50/60, so SATA SSDs are capped at 6 Gb/s while SAS drives can use the full 12 Gb/s link.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.