Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Dell PowerEdge R940 3U rack server front view with bezel and eight drive bays

DELL

DELL PowerEdge R940 3U rack server 4x Xeon Gold 6134 3.2GHz 8C 64GB DDR4 8x 2.4TB SAS H730P

SKU CH-26W3-0DASD

A 3U rack server with four 3.2 GHz Xeon Gold 6134 processors, 64 GB DDR4 memory, eight 2.4 TB SAS drives and a PERC H730P controller

  • TypeRack
  • Rack Height3U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed3.20 GHz
  • CPU SocketLGA 3647

Installed Memory Size 64GB

HDD 8 x 2.4TB 10K SAS

CPU Model Gold 6134

  • Four Intel Xeon Gold 6134 processors provide 8 cores each at 3.2 GHz base
  • 64 GB DDR4 registered ECC memory across 48 slots for large datasets
  • PERC H730P 2 GB controller supports RAID 0/1/5/6/10/50/60
  • Eight 2.4 TB 10K SAS drives deliver high-capacity storage
  • iDRAC9 Enterprise enables remote management with redundant 1600 W power supplies

Mission-critical 4-socket server

The Dell PowerEdge R940 is a 3U rack-mount server built for heavy workloads. Four Intel Xeon Gold 6134 processors each run eight cores at 3.2 GHz with a 3.7 GHz turbo frequency. The system ships with 64 GB of DDR4 registered ECC memory across 48 DIMM slots and supports up to 6 TB total capacity.

Suited for database and virtualisation clusters

This configuration targets organisations running large databases, in-memory analytics or dense virtualisation where four sockets and high core counts matter. Eight 2.4 TB 10K SAS drives behind a PERC H730P controller deliver redundant local storage. Buyers who need GPU compute, single-threaded frequency above 3.7 GHz or a chassis smaller than 3U should evaluate other platforms.

48 DDR4 slots define maximum memory

The motherboard provides 48 DDR4 DIMM slots, so the 6 TB ceiling is only reachable by populating every slot with high-capacity modules. Current 64 GB uses just four slots, leaving ample room for growth. Confirm your memory modules are DDR4 registered ECC; other generations will not fit.

Kohokohdat

  • Four Intel Xeon Gold 6134 processors provide 8 cores each at 3.2 GHz base
  • 64 GB DDR4 registered ECC memory across 48 slots for large datasets
  • PERC H730P 2 GB controller supports RAID 0/1/5/6/10/50/60
  • Eight 2.4 TB 10K SAS drives deliver high-capacity storage
  • iDRAC9 Enterprise enables remote management with redundant 1600 W power supplies

Tekniset tiedot

BrandDELL
SeriesPowerEdge R940
ModelR940
TypeRack
Rack Height3U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed3.20 GHz
CPU SocketLGA 3647
Number of CPU Cores8-Core Processor
# of Processors Installed4
MAX Processors4
ChipsetIntel C620
Installed Memory Size64GB
Memory TypeDDR4
Max Memory Capacity6TB
Number of Memory Slots48
Storage ControllerDell Perc H730P 2GB Controller
HDD InterfaceSAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion SlotsUp to 13 PCIe Gen 3 Slots, 3x PCIe x8, and 10 x PCIe 3.0 x16 slots
Management PortRJ 45
Operating SystemNo
Features8 x 2.5" SATA/SAS Hot-Plug Drive Bays

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What memory type and speed must I already have to add to the 48 DDR4 slots?

The system uses DDR4 2666MHz registered ECC modules; the 64GB installed is four 16GB sticks.

Will my existing 12Gb/s SAS drives work with the PERC H730P controller?

Yes, the H730P supports 12Gb/s SAS and SATA drives in RAID 0, 1, 5, 6, 10, 50, 60 and pass-through modes.

How do I confirm the iDRAC9 Enterprise remote management is active after setup?

Connect to the dedicated iDRAC network port, log in via browser, and verify the firmware version and system health dashboard appear.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.