Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2.5 inch SAS hard drive with black Dell caddy tray

DELL

DELL ST300MM0006 300GB 10000RPM SAS 6Gb/s 2.5in internal hard drive

SKU CH-5NCG-JGFY6

300 GB 10 000 RPM SAS drive with 64 MB cache and 2.5 inch form factor for Dell PowerEdge servers

  • 300 GB capacity stores more enterprise data
  • 10000 RPM spindle delivers faster transactional response
  • SAS 6 Gb/s interface enables high-throughput server connectivity
  • 64 MB cache buffers burst I/O workloads
  • 5 inch form factor fits dense PowerEdge bays

Dell Savvio 10K.6 SAS drive

This Dell Savvio 10K.6 ST300MM0006 is a 300 GB, 2.5 inch internal hard drive spinning at 10000 RPM with a 6 Gb/s SAS interface and 64 MB cache. It ships new in a lot of 10 units, each including an R Series caddy tray for direct installation in compatible bays. The drives are built for enterprise server workloads requiring consistent rotational speed and SAS connectivity.

Suited for listed PowerEdge servers

The drive fits Dell PowerEdge models including M600, M610, M710, R310, R410, R510, R610, R710, T310, T410, T610 and T710 among others listed in the compatibility data. Administrators replacing failed drives or expanding arrays in these specific chassis can use the included tray. Systems outside the listed PowerEdge series or those without SAS backplane support should look at other storage options.

6 Gb/s SAS interface decides fit

The single specification that determines whether this is the correct part is the 6 Gb/s SAS interface combined with the 2.5 inch form factor and R Series tray. The drive must connect to a SAS controller or backplane operating at this speed and accept the supplied caddy. Verify the server's drive bay and controller match these parameters before purchase.

Kohokohdat

  • 300 GB capacity stores more enterprise data
  • 10000 RPM spindle delivers faster transactional response
  • SAS 6 Gb/s interface enables high-throughput server connectivity
  • 64 MB cache buffers burst I/O workloads
  • 5 inch form factor fits dense PowerEdge bays

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What is the expected lifespan of the 10000RPM spindle motor in the ST300MM0006?

Enterprise-class 10000RPM SAS drives are rated for continuous operation; the spindle motor is designed to last the drive's service life in a PowerEdge server.

Which limit appears first when the ST300MM0006 runs sustained writes — the 6Gb/s SAS link or the 10000RPM mechanical throughput?

The 10000RPM mechanical throughput typically saturates before the 6Gb/s SAS interface becomes the bottleneck.

How much heat and noise does a 2.5in 10000RPM SAS drive add to a PowerEdge chassis running all day?

A single 2.5in 10000RPM SAS drive adds modest heat and low audible noise; multiple drives increase airflow demand in the PowerEdge chassis.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.