NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
E-POWER
This 700W ATX/EPS12V unit delivers stable power for high-performance PCs, cooled by a 135mm fan, and includes eight SATA connectors plus PCI‑Express 6‑pin and 6+2‑pin plugs
This 700W ATX/EPS12V unit supplies stable power to demanding desktop builds. A single 135mm fan cools internal components while keeping acoustic output low. The non-modular cable loom includes a 20+4 pin main connector, one 4+4 pin CPU connector, two 6-pin and one 6+2-pin PCIe connectors, eight SATA plugs, eight peripheral plugs and one floppy plug.
Verify that your case can accommodate a power supply up to 165mm in length. Ensure the motherboard accepts a 20+4 pin ATX connector and a 4+4 pin EPS12V connector. Confirm the graphics card requires no more than two 6-pin and one 6+2-pin PCIe power leads. Check that the total 12V rail current meets the combined +3.3V and +5V limits of 26A each.
The fixed cable set eliminates modular connectors but adds bulk behind the motherboard tray. Eight SATA power plugs support multiple drives and peripherals without adapters. Two 6-pin and one 6+2-pin PCIe leads cover most mid-range graphics cards in single or dual-GPU SLI and CrossFire configurations. A single floppy connector remains for legacy devices.
| Brand | E-POWER |
|---|---|
| Model | EP-700PM |
| Type | ATX 12V / EPS 12V |
| Maximum Power | 700 W |
| Fans | 1 |
| Main Connector | 20+4 Pin |
| PCI-Express Connector | 1 x 6 Pin, 2 x 6+2 Pin |
| SATA Power Connector | 8 |
| SLI | SLI Ready |
| CrossFire | CrossFire Ready |
| Max PSU Length | 165 mm |
| Modular | No |
| Power Rating | 700W |
| +3.3V Max. Current | 26A |
| +5V Max. Current | 26A |
| 12V Power Connector | 1 x 4+4 Pin ATX/EPS 12V |
| Floppy Connector | 1 |
| Peripheral Connector | 8 |
| Fans Total Quantity | 1 |
| Top Fans Size | 135mm |
The unit has fixed cables: a 20+4 pin main connector, one 4+4 pin EPS connector, one 6 pin and two 6+2 pin PCIe connectors, eight SATA plugs, eight 4-pin peripheral plugs and one floppy plug. No extra cables are required for a standard build.
At 700W the EP-700PM delivers up to 26A on both the +3.3V and +5V rails and supports SLI and CrossFire, so it handles a mid-range graphics card plus multiple drives without needing a higher-wattage unit.
The 135mm fan moves enough air to keep the 700W supply running at peak load while staying quieter than smaller fans, and the 165mm depth fits most standard ATX cases.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?