NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.
E-POWER
This 700W ATX/EPS12V unit delivers stable power for high-performance PCs, cooled by a 135mm fan, and includes eight SATA connectors plus PCI‑Express 6‑pin and 6+2‑pin plugs
This 700W ATX/EPS12V unit supplies stable power to demanding desktop builds. A single 135mm fan cools internal components while keeping acoustic output low. The non-modular cable loom includes a 20+4 pin main connector, one 4+4 pin CPU connector, two 6-pin and one 6+2-pin PCIe connectors, eight SATA plugs, eight peripheral plugs and one floppy plug.
Verify that your case can accommodate a power supply up to 165mm in length. Ensure the motherboard accepts a 20+4 pin ATX connector and a 4+4 pin EPS12V connector. Confirm the graphics card requires no more than two 6-pin and one 6+2-pin PCIe power leads. Check that the total 12V rail current meets the combined +3.3V and +5V limits of 26A each.
The fixed cable set eliminates modular connectors but adds bulk behind the motherboard tray. Eight SATA power plugs support multiple drives and peripherals without adapters. Two 6-pin and one 6+2-pin PCIe leads cover most mid-range graphics cards in single or dual-GPU SLI and CrossFire configurations. A single floppy connector remains for legacy devices.
| Brand | E-POWER |
|---|---|
| Model | EP-700PM |
| Type | ATX 12V / EPS 12V |
| Maximum Power | 700 W |
| Fans | 1 |
| Main Connector | 20+4 Pin |
| PCI-Express Connector | 1 x 6 Pin, 2 x 6+2 Pin |
| SATA Power Connector | 8 |
| SLI | SLI Ready |
| CrossFire | CrossFire Ready |
| Max PSU Length | 165 mm |
| Modular | No |
| Power Rating | 700W |
| +3.3V Max. Current | 26A |
| +5V Max. Current | 26A |
| 12V Power Connector | 1 x 4+4 Pin ATX/EPS 12V |
| Floppy Connector | 1 |
| Peripheral Connector | 8 |
| Fans Total Quantity | 1 |
| Top Fans Size | 135mm |
The unit has fixed cables: a 20+4 pin main connector, one 4+4 pin EPS connector, one 6 pin and two 6+2 pin PCIe connectors, eight SATA plugs, eight 4-pin peripheral plugs and one floppy plug. No extra cables are required for a standard build.
At 700W the EP-700PM delivers up to 26A on both the +3.3V and +5V rails and supports SLI and CrossFire, so it handles a mid-range graphics card plus multiple drives without needing a higher-wattage unit.
The 135mm fan moves enough air to keep the 700W supply running at peak load while staying quieter than smaller fans, and the 165mm depth fits most standard ATX cases.
Även i den här avdelningen
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
Det du betalar med, och det du ser priserna i.
Skickas från din plånbok i kassan
Endast visning — katalogen är prissatt i US-dollar
Ingen valuta matchar.
Välj det språk du vill att webbplatsen ska visas på.
Ny här?
Har du redan ett konto?
Det finns ingen automatisk återställning: den här butiken skickar inga e-postmeddelanden, så det finns ingen engångslänk att begära. Lämna adressen kopplad till kontot, så hanteras den för hand.
Förfrågan noterad
Inget är på väg till din inkorg — den här butiken skickar aldrig e-post. Någon tar hand om detta manuellt.
Kom du på det?