Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 1.75mm TPU filament spool 500g

E3D Online

E3D Online FleXD TPU Filament 1.75mm 500g Monster Green16 3d printers accessory

SKU CH-9JWM-Z755T

Semi-flexible TPU filament in 1.75 mm diameter, 500 g spool, prints at 220–240 °C with high abrasion resistance and elastic flexibility

  • ColorGreen
  • TypeFilament
  • Easy to print with 30% speed setting
  • High abrasion resistance for durable parts
  • High shear strength handles mechanical stress
  • Elastic flexible material with rich solid colour
  • Prints at 220-240°C with 45-85°C bed

Semi-flexible TPU filament for functional prints

This E3D spoolWorks FleXD filament delivers elastic, abrasion-resistant parts with a rich Monster Green16 colour. The 1.75 mm diameter spool weighs 500 g and prints at 220-240 °C with a bed temperature of 45-85 °C. It suits makers who want durable, flexible components such as phone cases, keyboard protectors or insoles without the hassle of difficult flexible materials.

500 g spool handles small batches.

At the recommended 30 % print speed (15 mm/s) a single spool comfortably produces multiple small accessories or one medium-sized functional part. High shear strength means finished prints withstand repeated bending and impact. The 500 g capacity runs out quickly for large-volume production or oversized models, so plan additional spools for extended projects.

Works with standard 1.75 mm extruders.

The filament feeds through any printer accepting 1.75 mm stock and pairs with E3D Scaffold support material that dissolves in tap water. A glue stick on the build plate improves first-layer grip across the 45-85 °C bed range. No specialised hot-end or enclosure is required, freeing you to print flexible parts on common desktop machines.

Kohokohdat

  • Easy to print with 30% speed setting
  • High abrasion resistance for durable parts
  • High shear strength handles mechanical stress
  • Elastic flexible material with rich solid colour
  • Prints at 220-240°C with 45-85°C bed

Tekniset tiedot

BrandE3D
ModelFleXD
ColorGreen
TypeFilament

Kysymyksiä tästä tuotteesta

Will the 1.75 mm FleXD filament feed reliably on a Bowden extruder that usually runs rigid PLA?

Yes, the 1.75 mm diameter matches standard Bowden tubes; print at 15 mm/s with 220-240 °C nozzle and 45-85 °C bed, using a glue stick for adhesion.

How can I confirm the Monster Green16 spool is printing correctly after the first layer?

A smooth, uniformly green first layer at 15 mm/s with no gaps or curling shows the 220-240 °C nozzle and 45-85 °C bed settings are working.

Does the 500 g spool include a glue stick or must I buy bed adhesive separately?

The box contains only the 500 g FleXD filament spool; a glue stick for bed adhesion is not included and must be purchased separately.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.