Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green 1.75mm TPU filament spool 500g

E3D Online

E3D Online FleXD TPU Filament 1.75mm 500g Monster Green16 3d printers accessory

SKU CH-9JWM-Z755T

Semi-flexible TPU filament in 1.75 mm diameter, 500 g spool, prints at 220–240 °C with high abrasion resistance and elastic flexibility

  • ColorGreen
  • TypeFilament
  • Easy to print with 30% speed setting
  • High abrasion resistance for durable parts
  • High shear strength handles mechanical stress
  • Elastic flexible material with rich solid colour
  • Prints at 220-240°C with 45-85°C bed

Semi-flexible TPU filament for functional prints

This E3D spoolWorks FleXD filament delivers elastic, abrasion-resistant parts with a rich Monster Green16 colour. The 1.75 mm diameter spool weighs 500 g and prints at 220-240 °C with a bed temperature of 45-85 °C. It suits makers who want durable, flexible components such as phone cases, keyboard protectors or insoles without the hassle of difficult flexible materials.

500 g spool handles small batches.

At the recommended 30 % print speed (15 mm/s) a single spool comfortably produces multiple small accessories or one medium-sized functional part. High shear strength means finished prints withstand repeated bending and impact. The 500 g capacity runs out quickly for large-volume production or oversized models, so plan additional spools for extended projects.

Works with standard 1.75 mm extruders.

The filament feeds through any printer accepting 1.75 mm stock and pairs with E3D Scaffold support material that dissolves in tap water. A glue stick on the build plate improves first-layer grip across the 45-85 °C bed range. No specialised hot-end or enclosure is required, freeing you to print flexible parts on common desktop machines.

Přednosti

  • Easy to print with 30% speed setting
  • High abrasion resistance for durable parts
  • High shear strength handles mechanical stress
  • Elastic flexible material with rich solid colour
  • Prints at 220-240°C with 45-85°C bed

Specifikace

BrandE3D
ModelFleXD
ColorGreen
TypeFilament

Otázky k tomuto produktu

Will the 1.75 mm FleXD filament feed reliably on a Bowden extruder that usually runs rigid PLA?

Yes, the 1.75 mm diameter matches standard Bowden tubes; print at 15 mm/s with 220-240 °C nozzle and 45-85 °C bed, using a glue stick for adhesion.

How can I confirm the Monster Green16 spool is printing correctly after the first layer?

A smooth, uniformly green first layer at 15 mm/s with no gaps or curling shows the 220-240 °C nozzle and 45-85 °C bed settings are working.

Does the 500 g spool include a glue stick or must I buy bed adhesive separately?

The box contains only the 500 g FleXD filament spool; a glue stick for bed adhesion is not included and must be purchased separately.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.