Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with silver PCIe connector, three blue USB-A ports and two blue USB-C ports on metal bracket

EN-Labs

EN-Labs PCIe x1 to 5-Port USB 3.2 Gen 1 Expansion Card (2× Type-C, 3× USB-A)

SKU CH-DG33-C0083

Adds five USB 3.2 Gen 1 ports — three Type-A and two Type-C — through a single PCIe x1 slot, delivering up to 5 Gbps per port

  • TypePCI Express to USB Card
  • Add five USB ports with two Type-C and three Type-A connectors
  • Reach 5 Gbps transfer rates under the USB 3.2 Gen 1 specification
  • Works in any x1, x4, x8 or x16 PCI Express slot
  • Powers connected devices directly from the slot with no extra cable
  • Supports Windows 10, Mac OS 10.8.2 and older systems with driver install

Five USB 3.2 Gen 1 ports for desktop expansion

This PCIe x1 add-in card adds three USB-A and two USB-C ports to a desktop computer. It is intended for users who need more high-speed ports for peripherals such as external drives, webcams, printers, or VR headsets. The card fits any available x1, x4, x8, or x16 PCI Express slot. A full-profile bracket and mounting screws are included for standard case installation.

Single-lane PCI Express host interface

The card connects through a single PCIe lane, limiting total shared bandwidth to the Gen 1 5 Gbps specification across all five ports. It draws power directly from the slot and requires no auxiliary power connector. Driver installation is necessary for Windows XP, Vista, and 7, while Windows 10 and Mac OS 10.8.2 or later support plug-and-play operation.

Frees front-panel ports and avoids hub bottlenecks

By providing native PCIe-attached ports, the card removes the need for external hubs that share a single upstream connection. It works with PCIe 2.0 and 3.0 motherboards and is backwards compatible with USB 2.0 and 1.1 devices. It is not suited for builders who require internal headers or more than five additional ports.

Kohokohdat

  • Add five USB ports with two Type-C and three Type-A connectors
  • Reach 5 Gbps transfer rates under the USB 3.2 Gen 1 specification
  • Works in any x1, x4, x8 or x16 PCI Express slot
  • Powers connected devices directly from the slot with no extra cable
  • Supports Windows 10, Mac OS 10.8.2 and older systems with driver install

Tekniset tiedot

TypePCI Express to USB Card

Kysymyksiä tästä tuotteesta

What does the 5 Gbps figure mean when the card is installed in a desktop PC?

The 5 Gbps rating is the maximum theoretical bandwidth of each USB 3.2 Gen 1 port; real-world transfer speeds will be lower and depend on the connected device, cable quality, and system load.

Which PCIe slot types accept this x1 expansion card?

The card fits any PCI Express x1, x4, x8 or x16 slot and works with PCIe 3.0 or 2.0 motherboards.

What mounting hardware is included for a standard desktop case?

A full-profile PCI slot cover and two installation screws are supplied in the box.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.