Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 3.5 inch SATA hard drive with circuit board visible

Epoch

Epoch 400-AJVL 8TB 7.2K SATA 3.5" 6Gb/s internal hard drive

SKU CH-X1QZ-A63CJ

8TB 7200 RPM SATA 3.5-inch drive validated for PowerEdge 12, 13 and 14 generation servers

  • InterfaceSATA
  • Capacity8TB
  • RPM7200 RPM
  • UsageIdeal for Servers
  • Form Factor3.5"
  • 8TB capacity stores large server datasets
  • 7200 RPM spindle delivers responsive throughput
  • SATA 6Gb/s interface connects to standard controllers
  • 5-inch form factor fits enterprise drive bays
  • Compatible with Dell PowerEdge 12 13 generation and Tower 12 14 generation servers

Epoch 8TB 7.2K SATA server drive

This Epoch 400-AJVL is an 8TB 3.5-inch internal hard drive spinning at 7200 RPM with a SATA 6Gb/s interface. It is supplied as a replacement kit and is listed as new condition.

Suits high-capacity server storage.

This drive suits administrators adding bulk storage to compatible Dell rack or tower servers across the 12th, 13th and 14th generation families listed in the specifications. Builders needing a 2.5-inch form factor or a mobile storage device should look at other products because this unit is a 3.5-inch desktop drive designed for fixed server bays.

7200 RPM spindle speed for sustained throughput

The 7200 RPM rotation rate is the single specification that determines whether this drive delivers the sustained sequential performance required for typical server workloads such as bulk data ingest, archival storage or backup targets. If the application demands lower latency or higher random IOPS than a mechanical spindle can provide, a solid-state alternative would be the appropriate choice.

Kohokohdat

  • 8TB capacity stores large server datasets
  • 7200 RPM spindle delivers responsive throughput
  • SATA 6Gb/s interface connects to standard controllers
  • 5-inch form factor fits enterprise drive bays
  • Compatible with Dell PowerEdge 12 13 generation and Tower 12 14 generation servers

Tekniset tiedot

InterfaceSATA
Capacity8TB
RPM7200 RPM
UsageIdeal for Servers
Form Factor3.5"

Kysymyksiä tästä tuotteesta

Does the replacement kit include mounting brackets or cables, or do I need to buy them separately?

The kit supplies the 8 TB 7200 RPM SATA 3.5" drive; mounting brackets and data cables are not included and must be sourced from the server chassis.

Should I choose this 8 TB model or a smaller capacity for a Dell PowerEdge R630?

The 8 TB 7200 RPM SATA drive matches the R630 3.5" bay and 6 Gb/s controller; select it when maximum capacity per bay is required.

What does the 6 Gb/s SATA rating mean once the drive is installed in a PowerEdge R720?

The 6 Gb/s SATA link allows the 7200 RPM drive to deliver sustained throughput up to the controller limit, so sequential reads approach the interface ceiling in the R720.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.