暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 3.5 inch SATA hard drive with circuit board visible

Epoch

Epoch 400-AJVL 8TB 7.2K SATA 3.5" 6Gb/s internal hard drive

SKU CH-X1QZ-A63CJ

8TB 7200 RPM SATA 3.5-inch drive validated for PowerEdge 12, 13 and 14 generation servers

  • InterfaceSATA
  • Capacity8TB
  • RPM7200 RPM
  • UsageIdeal for Servers
  • Form Factor3.5"
  • 8TB capacity stores large server datasets
  • 7200 RPM spindle delivers responsive throughput
  • SATA 6Gb/s interface connects to standard controllers
  • 5-inch form factor fits enterprise drive bays
  • Compatible with Dell PowerEdge 12 13 generation and Tower 12 14 generation servers

Epoch 8TB 7.2K SATA server drive

This Epoch 400-AJVL is an 8TB 3.5-inch internal hard drive spinning at 7200 RPM with a SATA 6Gb/s interface. It is supplied as a replacement kit and is listed as new condition.

Suits high-capacity server storage.

This drive suits administrators adding bulk storage to compatible Dell rack or tower servers across the 12th, 13th and 14th generation families listed in the specifications. Builders needing a 2.5-inch form factor or a mobile storage device should look at other products because this unit is a 3.5-inch desktop drive designed for fixed server bays.

7200 RPM spindle speed for sustained throughput

The 7200 RPM rotation rate is the single specification that determines whether this drive delivers the sustained sequential performance required for typical server workloads such as bulk data ingest, archival storage or backup targets. If the application demands lower latency or higher random IOPS than a mechanical spindle can provide, a solid-state alternative would be the appropriate choice.

特長

  • 8TB capacity stores large server datasets
  • 7200 RPM spindle delivers responsive throughput
  • SATA 6Gb/s interface connects to standard controllers
  • 5-inch form factor fits enterprise drive bays
  • Compatible with Dell PowerEdge 12 13 generation and Tower 12 14 generation servers

仕様

InterfaceSATA
Capacity8TB
RPM7200 RPM
UsageIdeal for Servers
Form Factor3.5"

この商品に関する質問

Does the replacement kit include mounting brackets or cables, or do I need to buy them separately?

The kit supplies the 8 TB 7200 RPM SATA 3.5" drive; mounting brackets and data cables are not included and must be sourced from the server chassis.

Should I choose this 8 TB model or a smaller capacity for a Dell PowerEdge R630?

The 8 TB 7200 RPM SATA drive matches the R630 3.5" bay and 6 Gb/s controller; select it when maximum capacity per bay is required.

What does the 6 Gb/s SATA rating mean once the drive is installed in a PowerEdge R720?

The 6 Gb/s SATA link allows the 7200 RPM drive to deliver sustained throughput up to the controller limit, so sequential reads approach the interface ceiling in the R720.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。