Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black USB 3.0 to SATA IDE converter kit with power adapter

ESTONE

ESTONE E01 USB 3.0 to SATA IDE Converter Kit with 12V/2A Power Adapter

SKU CH-0PSZ-YXQXH

Connects 2.5" and 3.5" SATA or IDE drives to USB 3.0 for simultaneous access and data transfer up to 5 Gbps

  • ColorBlack
  • Conversion Tray2.5" & 3.5"
  • Mobile Rack Drives Support2.5" & 3.5"
  • Mobile Rack InterfaceSATA I/II/III
  • Protection CaseMultiple Drives
  • Compatible Products2.5" & 3.5"
  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
  • Access three drives at once for direct file transfer
  • Transfer data at up to 5 Gbps with USB 3.0 speed
  • Works with Windows, Mac OS and Linux systems
  • Includes 12 V 2 A power adapter for 3.5" drives

Universal Drive Adapter Kit

The ESTONE E01 connects 2.5" and 3.5" SATA or IDE hard drives and solid-state drives to a computer through a USB 3.0 port. It accepts one SATA device and two IDE devices using 40-pin and 44-pin connectors. The kit includes a 12V 2A power adapter for desktop drives. It is aimed at users who need to recover, duplicate or archive data from legacy and current drives.

USB 3.0 Interface Limits

The adapter operates at up to 5 Gbps over USB 3.0 and falls back to USB 2.0 or USB 1.1 when connected to older ports. Drive capacity is supported up to 6 TB. The SATA connector is specified as SATA II. Optical drives such as DVD-ROM, CD-RW and DVD-RW are also supported. Actual throughput will depend on the drive and the host controller.

Build and Daily Use

The black enclosure houses the conversion circuitry and provides LED status indication. Plug-and-play operation works with Windows XP through Windows 10, Mac OS 9 and 10, and Linux without driver installation. The included power brick supplies 12V at 2A for 3.5" mechanisms. Three drives can be accessed simultaneously for direct file transfer between them.

Kohokohdat

  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
  • Access three drives at once for direct file transfer
  • Transfer data at up to 5 Gbps with USB 3.0 speed
  • Works with Windows, Mac OS and Linux systems
  • Includes 12 V 2 A power adapter for 3.5" drives

Tekniset tiedot

BrandESTONE
ModelE01
ColorBlack
Conversion Tray2.5" & 3.5"
Mobile Rack Drives Support2.5" & 3.5"
Mobile Rack InterfaceSATA I/II/III
Protection CaseMultiple Drives
Compatible Products2.5" & 3.5"

Kysymyksiä tästä tuotteesta

Which drive types and sizes can I connect with this adapter kit?

The kit connects 2.5" and 3.5" SATA hard drives and SSDs, plus 2.5" and 3.5" IDE hard drives using the included 40-pin and 44-pin connectors. It also supports optical drives such as DVD-ROM and CD-RW.

What does the 5 Gbps USB 3.0 rating mean for actual transfer speeds?

The 5 Gbps figure is the USB 3.0 interface ceiling; real-world throughput depends on the connected drive's own read and write limits, so a SATA SSD will hit higher sustained rates than a mechanical IDE drive.

How does the USB 3.0 interface affect compatibility with older ports?

The adapter is backward compatible with USB 2.0 and USB 1.1 ports, but transfer speed will be capped at the older port's maximum instead of the 5 Gbps USB 3.0 ceiling.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.