EZ Dupe, Inc. CF Pantera F23-SSP duplicator 23 target 35MB/s
- CF Duplicator
- 1 to 23
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
EZ Dupe, Inc.
Standalone duplicator copies up to 95 CompactFlash or MicroDrive cards at 35 MB/s per slot with 128 MB buffer and DoD-compliant erase modes
The EZ Dupe CF Pantera F95-SSP is a standalone CompactFlash duplicator that copies up to 95 target cards simultaneously from a single master. It targets forensic labs, industrial imaging houses and IT asset-disposal teams that need high-volume, unattended duplication or secure sanitisation without tying up a host computer.
The unit runs from a universal 115-230 V, 50/60 Hz AC supply with no external adapter, so it plugs into standard mains worldwide. Standalone operation means no active host-side processing, keeping heat and acoustic output low in typical office or lab environments.
Slot-load bays accept CompactFlash Type I, Type II and MicroDrive media directly, eliminating cable clutter and adapter wear. Four copy modes — Quick Copy, Whole Media, All Partitioned and Percentage Copy — plus four erase modes including DoD 5220.22-M 3-pass and 7-pass give operators flexible, standards-compliant workflows for both duplication and end-of-life sanitisation.
| Brand | EZ Dupe |
|---|---|
| Model | CF Pantera |
| Part Number | F95-SSP |
| Type | CF Duplicator |
| Target | 1 to 95 |
| Buffer Memory | 128M |
| Data Transfer Rate | 2GB/min |
| Operating Type | Standalone |
| Load Type | Slot |
| Power Supply | AC: 115-230 V, 50/60 Hz |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Connect the AC power cable to a 115-230 V, 50/60 Hz outlet, insert the source card into the master slot and up to 95 target cards into the remaining slots, then select a copy mode. The step users miss is verifying every target card is fully seated before starting.
The slot-load mechanism and internal fan are the only moving parts; expect to clean dust from the vents periodically and replace worn card slots if contacts degrade after heavy use.
The 128 MB buffer and 35 MB/s per-slot ceiling are reached before the power supply or thermal limits, so throughput plateaus when the buffer fills during large, continuous jobs.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?